Black Friday Flash Sale - Everything Must Go at 75% Off - Ends in 0d 00h 00m 00s - Coupon code: w75best

F5 301a Dumps

Page: 1 / 19
Total 189 questions

BIG-IP LTM Specialist: Architect, Setup, and Deploy (301a) Questions and Answers

Question 1

An HTTP monitor is created and assigned to a pool with the following non-default configuration:

Interval: 7 seconds

Timeout: 22 seconds

Reverse: Yes

Send String: GET/status.html HTTP/1.1/r/nHost:test.example.com/r/nConnector:Close Receive String: Up

The HTTP server sends the following response:

as

What is the resulting pool status?

Options:

A.

Unavailable (Enabled)

Available (Enabled)

B.

Offline (Enabled)

C.

Unknown (Disabled)

Question 2

An LTM device needs to be configured a virtual server. The application requires SSL encryption from the client to the server and an X-Forwarded-For added by the LTM device.

Which virtual server type should the LTM Specialist use?

Options:

A.

Forwarding (IP)

B.

Performance (HTTP)

C.

Standard

D.

Stateless

E.

Performance

Question 3

Import guest upgrade images to both vCMP hosts

An LTM Specialist must upgrade a vCMP Guest Active/Standby LTM pair from version 11.3 to 11.5.3 on two vCMP hosts. Where should the LTM Specialist import the 11.5.3 ISO images? (Choose one answer.)

Options:

A.

To both vCMP hosts

B.

To the primary vCMP host and the active guest instance

C.

To the secondary vCMP host and the standby guest instance

D.

To the vCMP guest instances

Question 4

Aggressive memory reaping and RAM Cache

An HA pair of LTM devices that load balance multiple HTTPS applications utilizes highly customized RAM Cache and compression profiles on each virtual server. The LTM Specialist observes log entries similar to: tmm tmm[7085] sweeper_update: aggressive mode activated (117504/138240 pages). No DoS attacks are occurring. No user problems have been reported. Which step should the LTM Specialist take to help mitigate the issue? (Choose one answer.)

Options:

A.

Change the Adaptive Reaping Low-water Mark

B.

Allocate less memory to the RAM Cache feature

C.

Change the Adaptive Reaping High-water Mark

D.

Use a OneConnect profile

Question 5

An LTM Specialist has trouble with SNMP traps in the management network The LTM Specialist takes the network capture shown to troubleshoot:

as

What should the UM Specialist change to capture packets related to this workflow?

Options:

A.

the interface

B.

the tcpdump filter expression

C.

the verbose level

D.

the port

Question 6

Six servers have a varying number of connections that change based on the user load.

Which load balancing method should an LTM Specialist apply to divided the web application traffic to the servers on the relative performance trend?

Options:

A.

Least Sessions

B.

Least Connections

C.

Predictive

D.

Ratio

Question 7

Which Standard Virtual Server settings should an LTM Specialist use to load balance across routed path of two different ISPs?

Options:

A.

address translation enabled and port translation disabled

B.

both address and port translation enabled

C.

both address and port translation disabled

D.

address translation disabled and port translation enabled

Question 8

Refer to the following iRule:

as

What is a complete list of profiles that must be applied to the virtual server for this iRule?

Options:

A.

Fast L4, HTTP

B.

TCP, HTTP

C.

TCP, HTTP, Client SSL

D.

Fast L4 , HTTP, Stream

Question 9

SFTP TCP with shared storage

Traffic to a pool of SFTP servers that share storage must be balanced by an LTM device. What profiles and persistence settings are required for a Standard virtual server? (Choose one answer.)

Options:

A.

TCP; no persistence profile will be used

B.

TCP, FTP; Source Address persistence

C.

TCP, Client SSL, FTP; server-side persistence

D.

TCP, Client SSL, Server SSL; persistence

Question 10

A LTM device needs to load balance active and passive FTP traffic while using only a single virtual server.

Which virtual server type should an LTM Specialist configure on the LTM device?

Options:

A.

Forwarding (Layer 2)

B.

Standard

C.

Stateless

D.

DHCP relay

E.

Forwarding (IP)

Question 11

An LTM Specialist needs to add a pool that will load balance MYSOL services. It has four members, each with differing hardware platforms. All pool members are already assigned to another pool for load balancing FTP traffic.

Which load balancing method is most effective when the LTM Specialist sets up the pool?

Options:

A.

Observed (node)

B.

Predictive member)

C.

Round Robin

D.

Least Connections (node)

Question 12

Refer to the exhibit.

as

An LTM Specialist has multiple SNAT and virtual server objects configured as in the bigip.conf shown.

The LTM Specialist tests a connection from a client with. IP 172.163.31.11 to 192.168.0.100:80.

Which two objects will show an increase in Local Traffic statistics connections?

Options:

A.

VS_A & SNAT_B

B.

VS_B & SNAT_B

C.

VS_ B & SNAT A

D.

VS_A & SNAT A

Question 13

Refer to the exhibit

as

Given the bigip conf extract shown where the servers only talk http on port 80, which node will receive the next user request?

Options:

A.

72.10.1.1

B.

10.1.1.1

C.

10.1.1.2 0

D.

10.1.1.3

Question 14

Geolocation iRule on SSL website

An LTM Specialist deploys an iRule designed to determine the country of origin of an incoming client connection. The iRule is used with an SSL-enabled web application. Which profile is required for the iRule to function properly? (Choose one answer.)

Options:

A.

DNS

B.

TCP

C.

UDP

D.

HTTP

Question 15

AN LTM Specialist is deploying an iRule designed to determine the country of origin of an incoming client connection. The iRule needs to be used with an SSL-enabled web application.

Which profile required for the iRule to function properly?

Options:

A.

HTTP

B.

DNS

C.

TCP

D.

UDP

Question stem requires the client IP to match the source region, so TCP ?UDP at the transport layer can meet the requirements. The title stem mentions that it is a Web application based on SSL, and it does not mention F5 undertakes SSL offload, So TCP is enough.

Question 16

An LTM Specialist needs to apply SNAT using currently used SNAT pool to a new virtual server.

What needs to be completed before applying that configuration change?

Options:

A.

Review connection for the selected SNAT pool and enlarge it if appropriate

B.

Make sure that the BIG-IP device is NOT operating under heavy load during peak times

C.

Verify that the IP address of the SNAT pool are in the same subnet as the pool members

D.

Verify that the IP address of the SNAT pool are in the same VLAN as the pool members.

SNAT does not need to in the same vlan or same network segment as the pool member, as long as the route is reachable , excluding C and D he connection information of the SNAT pool to avoid port exhaustion under high concurrency

Question 17

vCMP host HD1.2 upgrade

An LTM Specialist is completing an upgrade of a vCMP host to BIG-IP version 14.1. The system hosts a vCMP guest. The following software volumes are installed on the vCMP host:

Volume

Product

Version

Build

Active

Status

HD1.1

BIG-IP

13.1.3.2

0.0.4

Yes

Complete

HD1.2

BIG-IP

14.1.0.0

0.0.4

No

Complete

What is the supported method to complete this task? (Choose one answer.)

Options:

A.

On the vCMP guest, select HD1.2 in System > Software Management > Boot Locations; choose Yes to install configuration; select Activate.

B.

On the vCMP host, set the vCMP guest to Configured in vCMP > Guest List; activate HD1.2 through System > Software Management > Boot Locations.

C.

On the vCMP host, select HD1.2 in System > Software Management > Boot Locations; choose Yes to install configuration; select Activate.

D.

On the vCMP host, set the vCMP guest to Deployed in vCMP > Guest List; activate HD1.2 through System > Software Management > Boot Locations.

Question 18

Outbound SNAT pool of addresses

An LTM Specialist needs to use a set of addresses to access an Internet website in an outbound configuration. Which feature should be configured? (Choose one answer.)

Options:

A.

NAT address

B.

SNAT pool

C.

SNAT address

D.

NAT pool

Question 19

Four members in a server pool have similar hardware platforms. An LTM Specialist needs the load balancing method that can select the server with the fewest entries in the persistence table.

Which load balancing method should the LTM Specialist use?

Options:

A.

Observed

B.

Dynamic Ratio

C.

Least Sessions

D.

Leas Connections

Pay attention to the examination questions, the stem is to ask the session to keep the minimum entries in the table.

Question 20

AN LTM Specialist is setting up a new HTTPS virtual server to decrypt client traffic. SNAT the traffic and send the encrypted traffic to the poor member, the client ' s IP address must be included in the traffic

sent to the pool member.

What is a complete set of profiles that must be configured for the virtual server to meet these requirements?

Options:

A.

TCP, Client SSL, Server SSL

B.

TCP , Server SSL, HTTP

C.

TCP, Client SSL, HTTP

D.

TCP, Client SSL, Server SSL, HTTP

Question 21

An organization’s development team creates an application to put behind the BIG-IP LTM device. The application can be quite load intensive at first, and then evens out over time. The team’s load balancing method needs to select a pool after taking into account the pool member’s response over the time to avoid landing on a busy pool member.

Which of the following load balancing methods meets this requirement?

Options:

A.

Fastest (application)

B.

Predictive (member)

C.

Dynamic (node)

D.

Observed (member)

Question 22

External monitor Manual Resume

An LTM Specialist uses an external monitor to evaluate the hard drive usage of a node. The monitor marks the node down because it exceeds the specified threshold. Disk usage is corrected to below the threshold; however, the node remains offline. Which feature causes this behaviour? (Choose one answer.)

Options:

A.

The Up Interval is enabled with a value greater than 0

B.

Manual Resume is set to Yes

C.

Manual Resume is set to No

D.

Time Until Up has a value greater than 0

Question 23

Refer to the exhibit.

as

A pool is contoured with four members. A user has a current connection established with 10.18.1.40. The virtual server has a persistence Profile configured.

Options:

A.

10.18.1.10

B.

10.18.1.20

C.

10.18.1.40

D.

10.18.1.30

Question 24

PVA/OPVA virtual server

An LTM Specialist needs to configure a virtual server that uses PVA or OPVA. Which virtual server type should be used? (Choose one answer.)

Options:

A.

Performance (HTTP)

B.

Performance (Layer 4)

C.

Standard

D.

Stateless

Question 25

AVR website statistics

An LTM Specialist needs to gather website statistics such as latency and throughput on an existing virtual server that load balances backend web servers. Which F5 feature provides this? (Choose one answer.)

Options:

A.

The Statistics panel

B.

The Performance panel

C.

The AVR module

D.

The Dashboard

Question 26

An LTM Specialist needs to gather website statistics such as latency and throughput on the existing virtual server. This virtual server load Balances the backend web servers.

Which F5 feature will provide this?

Options:

A.

the Performance panel

B.

the AVR module

C.

the Dashboard

D.

the Statistics panel

Question 27

An HA pair of LTM devices that load balance multiple HTTPS applications utilizes highly customized RAM Cache and compression profiles on each virtual server. The LTM Specialist who is administering the HA pair regularly observes entines in the log similar to the following:

tmm tmm I708S1 011e0002.4. sweeper_update: aggressive mode activated (117504/138240 pages)

No DoS attacks arc occurring. No user problems have been reported. Which step should the LTM Specialist take to help mitigate the issue?

Options:

A.

change the Adaptive Reaping High watermark

B.

change the Adaptive Reaping Low watermark

C.

allocate less memory to the RAM cache feature

D.

use a OneConnect profile

Question 28

An LTM Specialist needs to configure a setup for antivirus scanning of HTTP traffic with an internet Contact adaption Protocol (ICAP) server.

Which two server type should be used? (Choose two.)

Options:

A.

Standard

B.

Internal

C.

Performance HTTP

D.

Forwarding IP

E.

Stateless

Question 29

An LI M device is experiencing a high volume of traffic. The virtual server is struggling under the load. The problem appears to be on the server side connections. The virtual server is accepting connections . The virtual server is accepting connections on https and is configured with an SSL profile and http pool.

What should be added to increase the performance of the device?

Options:

A.

an HTTP Compression profile

B.

a One Connect profile

C.

smaller key to the SSL profile

D.

a SPDY profile

Question 30

A virtual server is configured to handle https traffic. The clientssl profile is configured to use a 2048-bit RSA key. Due to security requirements, is the LTM Specialist needs to use a 4096-bit RSA key in the future.

What two effects will this change have on the BIG-IP device? (Choose two)

Options:

A.

Increase of CPU usage on the BIG-IP device

B.

Decrease to 20% of licensed TPS

C.

Decrease to 90% of licensed TPS

D.

Increased of concurrent connection on client-side

E.

Increase of TLS Renegotiation

Question 31

An LTM Specialist to configure a backend server to be disabled it takes longer than 30 seconds to respond to a request.

Which values should the LTM Specialist enter for interval and timeout?

Options:

A.

Interval 10, timeout 30

B.

Interval 10, timeout 31

C.

Interval 30, timeout 30

D.

Interval 30, timeout 91

The official recommendation is that timeout 3 times the interval value +1.

Question 32

An LTM Specialist regularly provides analytics reports that show that traffic generated by different subnets within the organization. The LTM Specialist needs show the associate department names next the IP addresses in the reports.

Which step should the LTM Specialist take to meet this requirement?

Options:

A.

use an iRule to change the output of the report

B.

export the report and add the department names manually

C.

create VLANs for each subnet and set the name accordingly

D.

define active subnets and assign a name to certain subnets

Question 33

An LTM Specialist needs to configure a virtual server with the requirements displayed below.

Application is currently an internal HTTP application

Encrypted external user access

Links are hard for siteA example.com and need to rewritten to siteB.Example.com

Which profiles must the LTM Specialist use to provide the proper functionality?

Options:

A.

Clientssll, Stream

B.

Serverless, Stream

C.

Clientssl, fastL4, Stream

D.

Serverless, fastL4, Stream

For http application and external encryption, clientssl is required, and if the message content needs to be modified, the steam profile is required. FastL4 profile cannot coexist with clientssl and stream.

Question 34

An LTM Specialist upgrades the switching infrastructure and the backend servers on the LAN segments.

The LTM Specialist notices a 20% memory usage increase on the BIG-IP device while handling the same number of concurrent connections.

A comparison of statistics pre-upgrade and post-upgrade shows a significant reduction on the following:

-RTT between the BIG-IP device and the backend servers

-Packet drops in the switch

Time to First Byte (TTFB)

The LTM Specialist is concerned with the scalability of the number of concurrent connections with the new memory usage.

Which setting should be changed to reduce the memory usage on the BIG-IP device?

Options:

A.

Reduce the proxy buffer high setting on the server-side TCP profile

B.

Increase the receive window of the client-side TCP profile

C.

Increase the proxy buffer high setting on the server-side TCP profile

D.

Reduce the idle of the client-side TCP profile

Explanation

After adjusting the architecture, the network quality becomes better. With the connection unchanged the memory usage increase by 20%. It means that the sending speed of the server is higher than the receiving speed of the client. F5 caches more content on the memory and causes the memory usage to….

Question 35

High-connection-count SNAT configuration

An application is expected to maintain more than 100,000 concurrent TCP connections to a single pool member. What is an appropriate SNAT configuration in this situation? (Choose one answer.)

Options:

A.

SNAT Automap enabled

B.

A SNAT pool with 4 IP addresses

C.

A SNAT pool with 1 IP address

D.

A static SNAT

Question 36

An LTM Specialist needs to load balance an application using an LTM device to meet the requirements:

The application servers do NOT Support SSL, but client access to the application should be secured.

Multiple requests from the same client should be sent to the same pool member.

All pool members will have roughly the same processing power, and traffic should be distributed evenly.

The LTM device is NOT the pool members ' default gateway.

which configuration should the LTM Specialist.

Options:

A.

a performance L4 virtual server with a SNAT and cookie persistence

B.

a performance L4 virtual server with a Client SSL profile and Source Address persistence

C.

A performance L4 virtual server with a SNAT, HTTP profile. Server SSL profile, and cookie persistence

D.

A standard virtual server with a SNAT, HTTP profile Server SSL profile, and cookie persistence

E.

A standard virtual server with a SNAT, HTTP profile, Client profile, andd cookie persistance.

Question 37

TWO LTM devices are in the same Device Group and configured for Ac live/Standby Failover. The LTM Specialist observes that the HA Active and Standby device constantly changes state. All network links use the default route domain A dedicated fiber ink is used for the HA connection with a latency of 250 ms but no packet loss.

as

What is causing the change in failover state to occur?

Options:

A.

The HA network is using the default routing domain.

B.

The HA network is using multicast IP.

C.

The HA network is not configured for mirroring.

D.

The HA network latency is too high.

Question 38

A new web application is being deployed Mutual SSL authentication must be used to authenticate clients.

Which of the following two tasks must be completed to meet the requirements? (Choose two)

Options:

A.

configure the server SSL profile with " Client Certificate " Set to require

B.

configure the client SSL profile with " Client Certificate " set to require

C.

instruct the desktop team to update the web browser to the most recent release

D.

generate a CSR to register a certificate with the CA

E.

configure the client SSL profile with the Trusted .Certificate Authorities

Question 39

A new DNS virtual server has been configured. Testing reveals that DNS server has failed to accept DNS over TCP. The configuration of the virtual server is as follows:

as

Which action should be taken to correct this issue?

Options:

A.

create a new virtual server with the service port of 53 and the protocol set to TC

B.

change the profile set on the virtual server To TCP/UDP

C.

change the profile set on the virtual server to TCP

D.

add a TCP prone to the existing virtual server.

Question 40

A web server ' s default gateway is the network router. The LTM Specialist needs to introduce an LTM device to load balance to the web servers without changing the server ' s default gateway.

Which deployment method and settings should the LTM Specialist use to ensure correct traffic flow and that the web servers can obtain the actual con IP addresses?

Options:

A.

route deployment with Automap configured and X-Forwarded-For inserted in HTTP headers

B.

route deployment without SNAT configuration

C.

SNAT deployment with automap configured and X-Forwarded-For inserted in HTTP headers

D.

SNAT deployment with automap configured

Question 41

An LTM Specialist configures a new HTTPS virtual server that contains a valid example.com ssl certificate. The LTM Special receives an error in the browser when connecting.

What must be added to the SSL Client profile to fix this issue?

Options:

A.

A sell-sign certificate

B.

A new example com certificate

C.

An intermediate certificate

D.

A public root certificate

Question 42

An LTM Specialist is experiencing issues in a failover event. Certain long-lasting FTP event. Certain long-lasting FTP connections using a single node pool are forced to reconnect. The bigip.conf extract is shown:

as

What does the LTM Specialist need to change in the configuration to avoid this issue?

Options:

A.

snatpool

B.

persistence mirroring

C.

connection mirroring

D.

ftp profile

Question 43

Exhibit.

as

The three VLANS shown provide connectivity to backend servers. The backend servers are being moved to unmanaged switches and require separate interfaces.

How should the F5 device interfaces be configured?

Options:

A.

Create a Trunk interface and combined interface 1.1.1.2 and 1.3.

B.

Create a Trunk interface and select VLAN„A, VLAN_B. and VLAN_C.

C.

Create VLAN named VLAN_A enter 100 under Tag and move interface 1.1 to tagged Create VLAN_B enter 200 and move interface 1.2 to tagged Create VLAN_C Center 300 and move interface 1.3 to tagged.

D.

Create VLAN_A move interface 1.1 to untagged. Create VLAN_B move interface 1.2 to untagged. Create VLAN_C move interface 1.3 to untagged.

Question 44

Exhibit.

as

- The LTM devices LTM 1 and LTM2 are configured in Device Group X (Sync-Failover)

- LTM3 and LTM4 are configured in Device Group Y (Sync-Only)

- An LTM specialist configures Device Group Z (Sync-Only) to keep several profiles in (sync-Only) to keep several profiles in sync across all devices.

- Device GROUP X has four Traffic Groups A.B.C and D configured.

- Device Group Y has four Traffic Groups E, F. G, and H configured

- Auto Fallback IS NOT Enabled.

- Each Device group is healthy and able to pass traffic for any traffic group assigned to that Device

Group.

The data center that contains LTM2 and LTM4 loses power. After 10 minutes; power is restored and all devices are up and healthy.

What is the state of each Traffic Group on each LTM device after power is restored?

as

Options:

A.

Option A

B.

Option B

C.

Option C

D.

Option D

Question 45

One LTM device in an HA pair of LTM devices is unable to reach its default gateway. An HA Failover event needs to happen.

Which configuration item enables this behavior?

Options:

A.

iRule

B.

Gateway Fail Safe

C.

Gateway pool monitor

D.

Gateway pool

Question 46

set payload {CACHE :: payload}

}

Which two profiles should be used on the virtual server? (Choose two.)

Options:

A.

http-transparent

B.

http compression

C.

http

D.

webacceleration

E.

stream

Question 47

An LTM device an application that requires all connections to be secured via SSL The device must verify that request contain a specific cookie before allowing the request to be sent to the pool member.

Which virtual server type should an LTM Specialist configure on the LTM device?

Options:

A.

Stateless

B.

Performance (HTTP)

C.

Standard

D.

Performance (Layer 4)

E.

Forwarding (IP)

Question 48

An LTM Specialist must reconfigure a BIG-IP LTM system that load balances traffic to web application servers. The application developer inform the LTM Specialist that TLS must be used to communicate

with the application servers.

Which additional profile is required as part of virtual server configuration?

Options:

A.

SPDV profile

B.

Server SSL

C.

Client SSL

D.

Rewrite profile

Question 49

A web application is configured as follows:

as

What should be modified to set a maximum request limit?

Options:

A.

Virtual server settings

B.

HTTP profile

C.

Pool settings

D.

ICP Profile

Question 50

An LTM Specialist needs to create an iRule that creates persistence records based on a JSESSIONID cookie. If a persistence record already exists, then the iRule must persist the client connection according to the existing record.

Which persistence profile enables the iRule to meet these requirements?

Options:

A.

Universal

B.

SSL

C.

Destination Address Affinity

D.

Cookie

E.

Source Address Affinity

Question 51

AN LTM Specialist must upgrade the VCMP Guest active/standby LTM pair from version 11.3 to 11.5.3 on two VCMP Hosts.

where should the LTM Specialist import the latest 11.5.3 ISO images?

Options:

A.

to the primary VCMP Host and the active Guest instance

B.

to both VCMP Hosts

C.

to the secondary vCMP Host and the standby Guest instance

D.

to the VCMP Guest instances

Question 52

New remote syslog via TMSH

The network team has recently added a new syslog server with IP address 10.1.1.12. Which command adds the new syslog entry on the F5 LTM device? (Choose one answer.)

Options:

A.

`tmsh modify sys syslog remote-servers add { server { host 10.1.1.1 remote-port 514 } } save sys config`

B.

`tmsh adjust sys syslog remote-servers add { server { host 10.1.1.1 remote-port 514 } } save sys config`

C.

`tmsh add sys syslog remote-servers add { server { host 10.1.1.1 remote-port 514 } } save sys config`

D.

`tmsh create sys syslog remote-servers add { server { host 10.1.1.1 remote-port 514 } } save sys config`

Question 53

An LTM device provides load balancing to a web application? The LTM device has two dual-core processors and a licensed SSL Transactions Per Second (TPS) limit of 500 CMP is enabled.

TLS connections are used between client systems and virtual servers on the LTM device, as well as from the LTM device to servers used as part of LTM pool.

TLS enabled virtual servers utilize certificates based on 2048-bit keys

During a peak period. 2560 new TLS transactions per second are attempted to the web application via the LTM device.

What will happen in this scenario?

Options:

A.

560 new TLS transactions will be silently discarded due to the SSL TPS license limit

B.

Nothing: TLS transactions per second are NOT affected by an SSL TPS license limit

C.

2060 new TLS transactions will be silently discarded due to the SSL TPS license limit

D.

Nothing: 2560 TLS transactions per second is within the SSI TPS license limit.

Question 54

A virtual server is using a TCP profile based on the top-wan-optimized profile for a streaming application Users report videos are loading slowly.

Which setting should be modified in the TCP profile to optimize the application?

Options:

A.

Disable Slow Start

B.

Disable Selective ACKs

C.

Disable Nagle ' s Algorithm

D.

Disable Reset on Timeout

Question 55

Connection mirroring performance impact

An LTM Specialist plans to enable connection mirroring for a virtual server in an HA environment. What must be considered before implementing the configuration change? (Choose one answer.)

Options:

A.

The add-on licence required for this feature

B.

Decreased number of possible concurrent connections

C.

Impact on system performance that might be noticeable

D.

Creating the required separate interface for connection mirroring

Question 56

Refer to the exhibit.

as

The pool shown is configured with four pool members in a variety of states. The application is receiving a large number of request. The LTM Specialist needs to make changes to make sure that all members receive the same levels of traffic.

Which changes need to be made?

Options:

A.

Enable 10.80.1.40 disable priority group activation, enable ratio

B.

Enable 10.80.1.40 and 10.80.1.1.20 disable group activation, enable Round Robin

C.

Enable 10.80.1.20 disable priority group activation, enable Round Robin

D.

Enable 10.80.1.40 and 10.80.1.20 disable priority group activation, enable ratio.

Page: 1 / 19
Total 189 questions