HPE Network Data Center Professional Architect Exam Questions and Answers
An RFP states that the proposal must be TAA-compliant. What conclusion should you make?
A customer is upgrading its data-center structured cabling to SMF. At the same time, the customer wants to upgrade the spine switches in its spine-and-leaf topology. A key objective of this upgrade is to eventually support 400GbE leaf-to-spine links. However, for some time, many leaf switches will continue to support 100GbE uplinks.
What is a valid recommendation for the spine switches?
A customer is deploying a cluster of twelve servers for AI workloads. Each server has four NVIDIA GPUs connected through NVLink. Each server supports 400 GbE connectivity on as many as six ports; however, you may recommend fewer ports. You have been asked to design a network for the servers’ backend AI interconnect.
Based on HPE Networking recommendations for this workload, how many CX 9300-32D switches should you propose?
Identify the documentation resources that provide validated information to help the architect design the solution. Choose two.
You are proposing an L3 spine-and-leaf topology to a customer. The solution includes four CX 8325-32C switches at the spine and two CX 8325-48Y8C switches in every server rack. For this customer, the leaf switches in one rack will provide the border-leaf functionality. The customer’s data center is expanding, and the customer asks how many total server racks this solution can scale to support.
What should you say?
When you create an endpoint group in Aruba Fabric Composer, which option should you choose in the Endpoints section to protect the hypervisor?
You have designed a spine-and-leaf topology containing 16 leaf switches and four spine switches. The customer does not have an existing overlay solution. You are helping the implementer work with the customer to obtain IP address blocks for the design. You plan to request these /24 subnets:
One for an individual loopback interface on each switch.
One for point-to-point connections between leaf and spine switches.
What is one correction you must make?
Which statement about VSX design is correct?
A customer’s legacy three-tier architecture is being modernized with an L3 spine-and-leaf topology. The CX switches in the topology will supply the overlay. The customer data center has six VRFs. The customer has requested service leaf switches to connect to two clustered firewalls that route and filter traffic between the VRFs.
How can the efficiency of traffic flow between subnets in the same VRF be maximized?
You are recommending HPE Aruba Networking Central to a customer. Which customer requirement can be met only with an AAS license rather than an AAE license?
Refer to the exhibit.

You are designing a data-center network. The customer requests connectivity between the data center and campus core switches. The customer uses VLANs for segmentation, but does not use VRFs.
What is the recommended design for the links between the data-center core switches and the campus core switches?
You are engaged by a customer with 1,115 employees to update the network after the previous network manager has left the company. Which methods can validate the present network state when the available network documentation is out of date? Choose two.
A long-standing customer has acquired a company with 3,500 employees and plans to bring the new data center sites up to its standards. The customer has requested a bill of materials based only on the locations and port counts at the data center sites.
Which valid assumptions should be documented in the proposal? Choose two.
You have designed an L3 spine-and-leaf topology for a customer’s highly virtualized VMware vSphere data center. The customer already uses HPE Aruba Networking mobility and switching solutions in the campus. You are recommending CX 8325 and CX 9300 switches and Fabric Composer. The customer asks you to justify the cost of the Fabric Composer licenses.
What should you explain?
Which statement correctly describes flow synchronization for HPE Aruba Networking CX 10000 Distributed Services Modules (DSMs) operating in VSX?
In a multi-fabric design, what is the minimum recommended MTU?
You are designing an L3 spine-and-leaf topology using CX switches. The switches implement EVPN VXLAN with a distributed gateway model. You are helping implementers compile a list of required loopback interface IDs and IP blocks.
What information is needed from the customer to complete this list?
You are completing a proposal for a data center network that includes 14 CX 8325 switches, 6 CX 6300M switches, and Fabric Composer licenses for these switches.
What is one assumption that could be included in the assumptions documentation?
A customer has deployed CX 10000 switches, Fabric Composer, and Pensando Policy and Services Manager (PSM). The switches are discovered in PSM, but no VRFs or networks have been added. The customer now wants to begin by applying micro-segmentation to one network. They state that they plan to add a policy containing rules that permit desired traffic from endpoints in this network. They will apply it to the network as an egress policy. At this time, they will not add any other networks to PSM or apply policies to them.
What warning should you raise to the customer about this plan?
Which information is likely to appear in the device-inventory deliverables? Choose two.
A customer currently has a data-center network using CX switches and Pensando for east-west firewalling. The data center is highly virtualized with VMware, but the customer is considering migrating some workloads to HPE VMs running on HPE Morpheus VM Essentials (VME).
What should you explain?