H12-511_V1.0 Questions and Answers
Which of the following behavior-analysis methods can be used to prevent passengers from approaching the rail at a metro station?
Options:
Tripwire crossing detection
Fast movement detection
Head counting
Loitering detection
Answer:
AExplanation:
Tripwire crossing detection is an intelligent behavior-analysis function that identifies objects crossing a predefined virtual boundary within a surveillance image.
Option A is correct because Huawei's training material specifically identifies restricted rail areas as an application scenario for tripwire crossing detection.
In a metro station, an administrator can define a virtual detection line along the boundary of a restricted track area. When a person crosses this boundary in the configured direction, the intelligent-analysis system generates an alarm.
The alarm can then trigger predefined linkage actions, including live-video display, recording, and notification of security personnel.
Option B — Fast movement detection identifies unusually rapid movement but does not directly determine whether a person has crossed a restricted boundary.
Option C — Head counting measures the number of people entering or leaving a designated area. It is intended primarily for occupancy and pedestrian-flow analysis.
Option D — Loitering detection identifies people remaining within a defined area beyond a configured duration. It does not specifically detect immediate entry across a restricted boundary.
The Huawei Lab Guide provides procedures for configuring intelligent behavior-analysis rules, including tripwire detection and related alarm settings.
Official Huawei references:
Training Material — Video Service Features: Behavior Analysis (1), PDF page 388 (printed slide 67). Lab Guide — Real-Time Behavior Analysis, Section 9.2.2.
Which of the following modes is unsupported by Huawei SDC omni-data structuring cameras?
Options:
Micro checkpoint
Target checkpoint
Full intelligence
Vehicle checkpoint
Answer:
DExplanation:
Huawei's Software-Defined Camera (SDC) omni-data structuring solution provides four predefined intelligent-analysis modes. The official training material identifies these modes as micro checkpoint, target checkpoint, full intelligence, and behavior analysis.
Option A is supported. Micro checkpoint mode enables structured detection and recognition of objects such as motor vehicles, non-motor vehicles, and pedestrians. It is particularly suitable for road and public-area monitoring.
Option B is supported. Target checkpoint mode supports target-oriented detection and capture, enabling the collection of information used in subsequent recognition and matching operations.
Option C is supported. Full intelligence mode provides comprehensive intelligent video-analysis capabilities according to the camera's supported configuration.
Option D is the correct answer because vehicle checkpoint is not identified as one of the four supported operating modes for the omni-data structuring camera in the V1.0 curriculum.
Vehicle-related detection may be performed within supported intelligent modes. However, this does not make vehicle checkpoint a separately defined operating mode in the product classification.
Both the official training material and the IP Camera Experiment Guide identify the same four operating modes, establishing the intended answer.
“target checkpoint, micro checkpoint, full intelligence, and behavior analysis modes.”
Official Huawei references:
Training Material — Omni-data Structuring Business, slide 248. Lab Guide — Experiment Environment Overview, page 7; Omni-data structuring camera.
Which of the following components are included in the anti-DDoS solution?
Select All that Apply
Options:
Detection center
Cleaning center
Management center
Router
Answer:
A, B, CExplanation:
Huawei's Anti-DDoS architecture separates attack monitoring, malicious-traffic mitigation, and centralized policy administration into distinct functional components.
Option A — Detection center: Monitors traffic and identifies suspicious patterns indicating a possible DDoS attack. Detection mechanisms can evaluate abnormal traffic volumes, protocol behavior, and other indicators associated with malicious requests.
Option B — Cleaning center: Performs traffic mitigation by removing or suppressing malicious packets while allowing legitimate service traffic to continue. The purpose is to maintain the availability of protected video-security applications during an attack.
Option C — Management center: Coordinates security policies and mitigation actions. It receives information from the detection function and manages the response according to configured rules.
Option D — Router: Although routers participate in forwarding, redirecting, and transporting traffic, a router is not one of the three dedicated functional centers identified by the question. It serves as supporting network infrastructure rather than the specified Anti-DDoS management, detection, or cleaning component.
Huawei's course illustrates how detection results are communicated to the management system so that attack traffic can be cleaned according to appropriate mitigation policies.
The separation of these functions enables centralized operational control while distributing traffic-monitoring and mitigation responsibilities throughout the network architecture.
Official Huawei references:
Training Material — Traffic Cleaning Server to Prevent DDoS Attacks, slide 195; Data Center Network Security, slide 196.
A longer camera focal length means a narrower field of view.
Options:
TRUE
FALSE
Answer:
AExplanation:
The focal length of a camera lens determines the angular extent of the scene captured by the image sensor. For a fixed sensor size, increasing focal length produces a narrower field of view and magnifies objects within the observed area.
A short focal length provides a wide viewing angle, making it suitable for monitoring large areas such as building entrances, public spaces, and indoor halls. By comparison, a longer focal length concentrates the image on a smaller area and allows distant objects to occupy more pixels within the captured frame.
This principle can be expressed through the horizontal field-of-view relationship: θ = 2 tan⁻¹(W / 2f), where θ represents the horizontal viewing angle, W is the sensor width, and f is the lens focal length.
As focal length increases while sensor width remains constant, the calculated viewing angle decreases.
In video-security design, this relationship is essential when selecting lenses for vehicle monitoring, perimeter protection, identification checkpoints, and long-distance observation.
Huawei distinguishes wide-angle, standard, and telephoto lenses according to focal length and field of view. The training material explicitly describes the inverse relationship between focal length and the horizontal area visible through the camera.
Official Huawei references:
Training Material — Optical Module – Lens, slide 16; Main Lens Parameters, slide 17; Focal Length, slide 18; Angle of View, slide 19.
The Huawei HoloSens Intelligent Vision System (IVS) can connect to cameras from different vendors by using different access protocols for unified management. This enables users in upper-level areas to view live video or recordings from cameras in lower-level areas.
Options:
TRUE
FALSE
Answer:
AExplanation:
Huawei HoloSens IVS supports unified video management across heterogeneous surveillance environments, including cameras supplied by different manufacturers and connected using different supported access protocols. The statement accurately describes an application scenario explicitly documented in the V1.0 training material.
The platform's camera-access function provides an abstraction layer between field equipment and centralized video-management applications. Compatible cameras can be integrated through supported interconnection mechanisms, permitting administrators to configure and manage devices through centralized services.
In a hierarchical surveillance deployment, lower-level platforms and cameras serve local monitoring requirements, while upper-level management domains provide broader operational supervision. Authorized users at the upper level can retrieve live-video streams and recorded footage originating from cameras deployed in subordinate areas.
This capability is particularly important for citywide surveillance, distributed enterprises, and multi-site security systems. It enables centralized observation without requiring every operator to access individual camera interfaces.
Huawei also describes management improvements through batch configuration and plug-and-play camera integration. These functions reduce repeated commissioning work and improve administration across large deployments.
Successful cross-level access depends on compatible protocols, platform interconnection, network reachability, and appropriate user permissions.
“Cameras from different vendors and using different access protocols are connected to the system for unified management.”
Official Huawei references:
Training Material — Camera Access and Real-Time Observation, PDF page 377 (page label as stated in prior batch).
A video security platform offers functions including video recording, video image control, video-based alarming, and alarm linkage.
Options:
TRUE
FALSE
Answer:
AExplanation:
A video-security platform provides centralized functionality for collecting, managing, recording, displaying, analyzing, and responding to surveillance video and associated security events.
Video recording enables the system to store surveillance footage for later retrieval, playback, investigation, and evidence management. Depending on the platform architecture, recording can be scheduled, manually initiated, or associated with alarm conditions.
Video image control allows authorized operators to manage live-video presentation, select camera streams, perform supported PTZ operations, and control related viewing functions.
Video-based alarming uses intelligent analysis or configured detection mechanisms to identify events that require attention. These can include perimeter intrusion, tripwire crossing, abnormal movement, and other supported surveillance scenarios.
Alarm linkage extends this functionality by initiating predefined actions when an alarm condition occurs. For example, the platform may start recording, display the relevant live stream, generate an alarm notification, or activate an associated response mechanism.
Huawei's training material describes VMS capabilities including video management, media services, data analysis, and device interconnection. Its intelligent video-security architecture also supports automated alarm information handling.
The Lab Guide demonstrates practical configuration of recording and intelligent behavior analysis, reinforcing the connection between event detection and operational response.
The statement accurately summarizes core video-security platform functions and is therefore true.
Official Huawei references:
Training Material — Intelligent Video Security System, slide 8; VMS, slide 64; Video Security Client, slide 103. Lab Guide — Experiment 2, Recording Configuration; Experiment 4, Intelligent Behavior Analysis.
Compared with optical image stabilization, electronic image stabilization provides better results and costs less.
Options:
TRUE
FALSE
Answer:
BExplanation:
The statement is false because electronic image stabilization (EIS) generally costs less than optical image stabilization (OIS), but Huawei's training material identifies optical stabilization as providing better stabilization results.
Optical image stabilization compensates for camera movement through an optical stabilization mechanism. Depending on camera design, this mechanism adjusts optical components to reduce the displacement of the image caused by vibration or shaking.
Because optical correction occurs before image capture, it can preserve more image detail and avoid certain limitations associated with post-processing.
Electronic image stabilization, by contrast, uses image-processing algorithms to estimate and compensate for movement. EIS can digitally reposition, crop, or transform video frames to reduce apparent shaking.
Electronic stabilization can be implemented with fewer dedicated mechanical components, which generally reduces hardware cost and design complexity. However, digital correction may introduce cropping, interpolation artifacts, or reduced effective image resolution.
These characteristics are particularly important for cameras installed on poles, towers, roadside infrastructure, or locations exposed to mechanical vibration.
The question combines two claims: better stabilization and lower cost. Although the lower-cost characteristic is generally accurate for EIS, the claim that it produces better results contradicts the Huawei course material. Therefore, the complete statement is false.
“The optical image stabilization has better effect and higher cost than the electronic image stabilization.”
Official Huawei references:
Training Material — Camera Features – Image Stabilization, slide 45.
HD cameras have a resolution of at least ( ).
Options:
2048p
720p
1080p
560p
Answer:
BExplanation:
High-definition (HD) cameras support video resolutions beginning at the 720p classification. In standard 16:9 video terminology, 720p commonly represents a resolution of 1280 × 720 pixels, while 1080p corresponds to Full HD at 1920 × 1080 pixels.
Option B is correct because 720p is the minimum conventional HD resolution among the available choices. The letter p identifies progressive scanning, in which every line of the image is displayed during each frame.
Option A is incorrect because 2048p represents a much higher vertical resolution and is not the minimum requirement for HD classification.
Option C is incorrect because 1080p is classified as Full HD. Although Full HD cameras are also high-definition devices, 1080p is not the minimum HD threshold.
Option D is incorrect because 560p falls below the conventional 720p high-definition threshold.
In video-security applications, resolution influences the amount of image detail available for observation, recording, and intelligent analysis. Increasing resolution can improve identification capabilities, but it also increases demands on encoding, transmission bandwidth, and storage unless corresponding compression or bit-rate controls are applied.
Huawei's training material explains the relationship between pixel count and image resolution and distinguishes camera products by definition.
Official Huawei references:
Training Material — Camera Classifications, slide 10; Basic Concepts of Video Encoding – Pixel and Resolution, slides 49–50; Multi-Stream Technology, slide 34.
At a Huawei video site, the main control unit primarily integrates the lithium battery and network module.
Options:
TRUE
FALSE
Answer:
BExplanation:
The statement is false because Huawei's video-site function module integrates power-supply and network-transmission functions, while the lithium battery forms a separate energy-storage component of the complete site solution.
Huawei's PowerCube 500-based video-site architecture is designed to simplify installation by integrating power conversion, network connectivity, and associated interfaces into a compact functional module.
The network board provides communication interfaces, including supported electrical Ethernet ports, optical interfaces, and connectivity to external network equipment. This enables cameras and other video-site devices to communicate through the available backhaul infrastructure.
The power board converts incoming electrical power into the voltage outputs required by connected devices. Huawei describes support for power conversion, equipment power delivery, fault reporting, and communication with the network-management system.
Lithium batteries provide backup energy when the primary electricity supply is interrupted. They communicate with the function module through the designated battery interface but are not equivalent to the integrated network or power board.
Therefore, describing the main function module as an integration of the lithium battery and network module incorrectly combines separate components of the site architecture.
The correct architectural distinction is between the integrated power/network function module and the associated lithium-battery energy-storage system.
Official Huawei references:
Training Material — Huawei Video Site Introduction; Function Module (1), page 22; Function Module (2), page 23; Function Module (3), page 24; Lithium Battery, page 26.
Video at 30 fps is smoother than video at 60 fps.
Options:
TRUE
FALSE
Answer:
BExplanation:
The statement is false because, under comparable capture and playback conditions, video recorded at 60 frames per second (fps) generally provides smoother motion representation than video recorded at 30 fps.
Frame rate specifies the number of individual images captured or displayed during one second.
At 30 fps, a new image is presented approximately every 33.3 milliseconds. At 60 fps, a new image is presented approximately every 16.7 milliseconds.
The higher frame rate provides more frequent updates of moving objects, reducing the apparent interval between successive motion positions.
This is particularly useful in video-security applications involving rapidly moving vehicles, crowded environments, and other scenes where motion continuity is important.
Huawei's training material explicitly states that higher frame rates produce smoother images, while lower frame rates increase visible motion jitter.
However, increasing frame rate also creates additional requirements for video encoding, network bandwidth, storage capacity, and processing performance.
The practical benefit depends on the complete video pipeline, including camera capability, recording configuration, display refresh rate, and available bandwidth.
A 60 fps stream cannot deliver its intended motion advantage if frames are excessively dropped or the playback system cannot display them appropriately.
Nevertheless, when comparing equivalent video streams under suitable operating conditions, 60 fps provides smoother motion than 30 fps.
Official Huawei references:
Training Material — Basic Concepts of Video Encoding: Video, Frame, and Bit Stream, PDF page 48. Lab Guide — Section 1.2.2.4, Video Stream Parameters, Table 1-4, Frame Rate.
What are the applications of big data in the video-security field?
Select All that Apply
Options:
Vehicle search by image
Traffic violation detection
Vehicle search
Vehicle trajectory analysis
Answer:
A, B, C, DExplanation:
Big-data technology enables video-security platforms to process, correlate, retrieve, and analyze substantial volumes of surveillance information. Huawei's curriculum identifies all four options as applications of intelligent video data processing.
Option A — Vehicle search by image: Image-based vehicle search compares visual characteristics extracted from a reference image against vehicle records. Relevant attributes may include vehicle appearance, color, model, and distinguishing features.
Option B — Traffic violation detection: Intelligent traffic systems identify violations such as improper driving behavior, seat-belt noncompliance, and other traffic-safety events. Detected events can be organized and analyzed alongside structured vehicle records.
Option C — Vehicle search: Structured vehicle searches use attributes such as license plate number, plate color, vehicle brand, and vehicle type to retrieve matching records from large datasets.
Option D — Vehicle trajectory analysis: By correlating vehicle observations across multiple checkpoints, the system can reconstruct movement patterns, examine routes, and identify vehicles of interest.
Huawei's training material groups these capabilities under intelligent big-data applications. It specifically links vehicle attributes with vehicle searching, traffic violation detection, image-based searching, and trajectory analysis.
The distinguishing feature is the conversion of raw surveillance information into searchable, structured data that supports investigation and operational decision-making.
Official Huawei references:
Training Material — Application of New Technologies; Big Data Technology Application, slide 134.
Which of the following functional modules are included in a video management system (VMS)?
Options:
Network, stream media forwarding, and storage modules
Encoder, switch, server, and client software
Stream media forwarding, encoding, and video decoding modules
Stream media forwarding, system management, and data storage and analysis modules and client software
Answer:
DExplanation:
A Video Management System (VMS) is a centralized software platform responsible for managing video-security resources, presenting services to users, processing recorded information, and coordinating video-related operations.
Option D is correct because it represents the broad functional composition of a VMS, incorporating streaming-media forwarding, system administration, video and data storage, analysis capabilities, and client software.
The streaming-media component manages the distribution and forwarding of video streams. System management provides centralized control over devices, users, service configurations, and operational resources. Storage services handle recorded video and image data, while analysis functions support extraction, retrieval, and processing of intelligent information. Client software exposes these functions to administrators and operators.
Option A is incomplete because networking, stream forwarding, and storage alone do not represent the complete VMS functional architecture.
Option B describes physical infrastructure and software components rather than the functional modules that define VMS services.
Option C is incomplete because forwarding, encoding, and decoding do not encompass system management, analytical processing, and user-facing application services.
Huawei also identifies interconnection gateways, video management, media replication, transcoding, and structured-data analysis as important VMS capabilities.
The distinction is between a collection of surveillance devices and a centralized management platform that coordinates their services.
“VMS: Video Management System.”
Official Huawei references:
Training Material — Video Security Platform Introduction; VMS, slide 64; Cloud Platform, slide 65.
Which of the following statements are accurate about Huawei HoloSens IVS3800?
Select All that Apply
Options:
Supports the lightweight cloud OS and resource pooling to ensure that one server meets customer requirements.
Supports deployment of storage, compute, and search resources in cluster mode, as well as elastic scaling.
Supports task, algorithm, and resource collaborations.
Supports target alerts and reverse image search.
Answer:
A, B, C, DExplanation:
Huawei HoloSens IVS3800 combines a distributed computing and storage architecture with intelligent-analysis capabilities and container-based service management. All four statements reflect platform features described in the V1.0 course.
Option A is correct in the intended deployment context. IVS3800 supports Lite Edge OS, resource pooling, and combinations of storage, computation, and search services on a single server. Actual workload capacity remains dependent on the hardware configuration and customer requirements.
Option B is correct. Huawei supports clustered deployment of storage, computing, and search resources, together with distributed horizontal expansion, dynamic workload allocation, and service migration.
Option C is correct. The platform supports collaboration across tasks, algorithms, and resources. This includes workload scheduling, algorithm deployment, and cloud-edge coordination intended to improve resource utilization.
Option D is correct. Huawei's intelligent-video services support target alerts and image-based searching. Intelligent target analysis can trigger alerts when matching targets appear, while image retrieval enables searches using visual or structured features.
These capabilities are closely related to IVS3800's architectural objectives: consolidated resources, flexible scaling, intelligent processing, and centralized management.
The platform can therefore serve both compact deployments and larger distributed surveillance environments, subject to supported product capacity and configuration.
Official Huawei references:
Training Material — Lite Edge Positioning, PDF page 352; Lite Edge Features, PDF page 353; Intelligent Target Attribute Analysis, PDF page 383; Video Search and Synopsis, PDF page 386; Cloud-Edge Synergy, PDF page 392.
Which statement below is incorrect regarding Huawei HoloSens IVS9000?
Options:
Flexible resource allocation, supporting rapid application innovation.
Resource collaboration between upper and lower levels.
Service applications invoke hardware resources in the host OS through the container engine.
Computing resource pooling, on-demand service orchestration and management.
Answer:
CExplanation:
Huawei HoloSens IVS9000 is positioned as a centralized intelligent-video platform based on cloud infrastructure, resource pooling, distributed services, and coordinated operation across surveillance domains.
Option A is accurate. The platform supports flexible resource allocation and service deployment, facilitating the introduction and expansion of intelligent applications.
Option B is accurate. Huawei documents cloud-edge synergy and collaboration between upper-level and lower-level surveillance platforms.
Option D is accurate. Computing resource pooling, service orchestration, and centralized management are fundamental characteristics of the cloud-based center-platform architecture.
Option C is the intended incorrect statement in the IVS9000 architecture comparison. Huawei uses this particular description of service applications invoking hardware resources through a host operating system and container engine when explaining the Lite Edge architecture.
By contrast, the IVS9000 center-platform architecture described in the V1.0 course uses Huawei Cloud Stack (HCS), cloud resource services, virtualization, and application-service layers.
The distinction is architectural: Lite Edge is presented using host-operating-system and container-management concepts, whereas the center platform is presented through cloud infrastructure and pooled resources.
Container technology can also operate within cloud platforms, so option C is not universally false as a technical statement. It is the mismatched description in the specific Huawei product-architecture comparison.
Official Huawei references:
Training Material — Lite Edge Logical Architecture, PDF page 358 (printed slide 36); Center Platform Features, PDF page 365 (printed slide 44); Center Platform Logical Architecture, PDF page 373 (printed slide 52).
Which of these services cannot be delivered by Huawei HoloSens IVS3800?
Options:
Image management
Image collection
Image search
Image analysis
Answer:
BExplanation:
Huawei HoloSens IVS3800 is an intelligent video platform that integrates video management, intelligent analysis, structured-data processing, and information retrieval. Its service architecture distinguishes platform-side image processing from front-end image acquisition.
Option A — Image management: This is a supported IVS3800 service. It provides video and image access, storage, forwarding, and management capabilities through the platform's business-service layer.
Option B — Image collection: This is the intended exception. Image acquisition takes place primarily at front-end devices, including IP cameras and intelligent software-defined cameras. These devices capture optical information and convert it into video or image data before transmitting it to the platform. Although IVS3800 receives and manages collected information, the course does not list image collection as a separate IVS3800 business-service module.
Option C — Image search: IVS3800 provides search capabilities for processed images, structured attributes, and feature information. The IVS3800R retrieval component supports object searching using data generated by intelligent analysis.
Option D — Image analysis: IVS3800 provides intelligent analysis through its computing services, including person and vehicle attribute extraction, behavior analysis, and other supported algorithms.
The distinction is between capturing images at the device layer and processing, managing, and retrieving those images at the platform layer.
Official Huawei references:
Training Material — Lite Edge Positioning, PDF page 352; Lite Edge Logical Architecture, PDF page 358 (printed slide 36).
Which of the following storage methods are commonly used in a video security system?
Select All that Apply
Options:
Disk array
Digital video recorder (DVR)
Cloud storage
Network video recorder (NVR)
Answer:
A, B, C, DExplanation:
Video-security systems use several storage architectures and recording devices to meet different requirements for recording capacity, reliability, scalability, and centralized management. All four listed technologies can be used to store surveillance video.
A. Disk array: Disk arrays combine multiple physical storage drives into a logical storage resource. Depending on the implementation, RAID technology can improve storage availability, provide redundancy, and support the continuous writing of surveillance recordings.
B. Digital video recorder (DVR): A DVR primarily receives video from analog cameras, converts the incoming signals into digital recordings, and stores the resulting video data on local storage devices.
C. Cloud storage: Cloud storage provides scalable storage resources through a centrally managed infrastructure. It is especially relevant to large surveillance deployments requiring flexible capacity expansion and centralized storage management.
D. Network video recorder (NVR): An NVR receives encoded digital video streams from IP cameras across a network and manages their storage, retrieval, and playback.
These solutions differ in architecture and operating characteristics. DVRs and NVRs are recording systems, disk arrays are storage infrastructure, and cloud storage is a resource-delivery architecture.
Huawei's training material discusses these technologies within the broader evolution from analog video systems to network-based and cloud-oriented surveillance platforms.
Official Huawei references:
Training Material — DVR and DVS, slide 61; NVR, slide 62; Basic Concepts of RAID, slides 71–80; Storage Architecture, slides 82–86; Video Storage Mode, slide 88.
Which of the following RAID modes does not support data verification?
Options:
RAID 5
RAID 3
RAID 1
RAID 6
Answer:
CExplanation:
RAID 1 provides data redundancy through disk mirroring rather than parity-based verification. Consequently, RAID 1 is the correct answer when the question asks which RAID level does not support parity-based data checking.
In RAID 1, identical copies of data are maintained on separate disks. If one disk fails, the surviving mirror can continue providing access to the stored information. However, this mechanism does not generate or store dedicated parity information for reconstructing data in the manner used by parity-based RAID configurations.
Option A — RAID 5: Uses block-level striping with distributed parity information. Its parity mechanism enables data reconstruction following a supported disk failure.
Option B — RAID 3: Uses data striping with parity information stored on a dedicated disk. The parity information provides error-recovery capabilities.
Option C — RAID 1: Uses mirroring and does not employ parity-based checking. This matches the question's intended distinction.
Option D — RAID 6: Uses distributed dual-parity information, allowing the array to tolerate two disk failures under supported conditions.
It is important to distinguish parity checking from other integrity mechanisms. RAID 1 can detect or report errors through controller and disk-level mechanisms, but parity is not its redundancy method.
“RAID1 — Data mirroring, no parity check”
Official Huawei references:
Training Material — Basic Concepts of RAID, slide 71; RAID Levels – RAID 0 and RAID 1, slide 77; RAID Levels – RAID 3 and RAID 5, slide 78.
Which of the following devices are part of a video security center?
Select All that Apply
Options:
Video wall
Decoder
Control keyboard
Matrix
Answer:
A, B, C, DExplanation:
A video-security center is the centralized operational environment used to monitor, control, display, and coordinate video-surveillance services. Huawei's training material identifies the video wall, decoder, control keyboard, and matrix as components of the security-center architecture.
A. Video wall: Provides large-scale visual presentation of surveillance feeds, alarm-related images, and operational information. It supports simultaneous monitoring of multiple camera streams and coordinated incident management.
B. Decoder: Converts encoded digital video streams into image signals suitable for display. A decoder enables video received through a network to be presented on compatible monitoring screens.
C. Control keyboard: Allows operators to control surveillance functions, including video selection, switching, and supported pan-tilt-zoom operations. It provides a dedicated interface for monitoring-center personnel.
D. Matrix: Performs video switching and distribution, directing selected video sources to designated display outputs. This enables flexible presentation of surveillance information across multiple monitors.
These components operate together to provide a coordinated surveillance environment. The matrix manages video switching, the decoder prepares digital streams for display, the video wall presents surveillance images, and the control keyboard provides operational control.
Huawei's video-security center architecture explicitly includes all four devices, alongside the video-security client.
Official Huawei references:
Training Material — Video Security Center Composition, slide 102; Matrix, slides 104–105; Decoder, slide 106; Video Wall, slides 107–109; Control Keyboard, slides 110–113.