HCSA-Presales-AI V1.0 Questions and Answers
Which of the following are the primary roles of Huawei AI storage in inference?
Select all that apply.
Options:
Reducing the first token generation duration
Reduce system power consumption
Improve the cluster throughput
The assistant system supports longer sequence inference.
Answer:
A, C, DExplanation:
Exact Extract — Huawei Training Material, Pages 166–169
"Huawei AI Storage Inference Acceleration Solution Significantly Reduces Latency of The First Token, Improves Throughput Performance, and Enhances Inference Experience"
"Adaptive global prefix cache — Up to 90% lower TTFT"
"Ultra-long sequence (millions of tokens) inference supported"
"10x larger inference context window"
"10x higher throughput (TPS) for long sequences"
The Qwen 32B inference test example reports 66% lower TTFT and 43% higher cluster throughput, while the long-sequence DeepSeek R1 example reports more than twice the cluster throughput under its tested conditions.
Technical Deep Dive:
Huawei AI Storage inference acceleration addresses three important challenges in large language model serving: response latency, inference throughput, and long-sequence memory requirements.
Option A is correct. Time to First Token (TTFT) can be reduced by reusing previously computed KV-cache states.
When users submit requests containing identical or overlapping prefixes, the system can retrieve cached attention states instead of repeatedly performing the same prefill computation.
This is particularly beneficial for retrieval-augmented generation, repeated system prompts, and multi-turn conversations.
Option C is correct. Reduced repeated computation enables inference accelerators to process more useful requests within the available computing capacity.
Huawei's cache management and sparse attention optimization mechanisms can therefore improve aggregate cluster throughput.
Option D is correct in the intended solution context. Huawei supports long-sequence inference through hierarchical KV-cache management, cache offloading, and sparse attention acceleration.
These techniques reduce accelerator memory pressure and enable larger effective working contexts in supported inference configurations.
However, external storage alone cannot override a model's intrinsic positional-encoding and context-support limitations. The model and inference software must also support the intended extended context.
Option B is not a stated primary inference-storage role. Reduced repeated computation may indirectly reduce energy consumption, but power reduction is not one of the principal benefits identified for this solution.
Therefore, A, C, and D are correct.
How long is typically needed to pre-train a model?
Options:
More than 1 month
3 weeks
2 weeks
1 week
Answer:
AExplanation:
Exact Extract — Huawei Training Material, Page 29
"The training duration of a large model is proportional to the number of model parameters and the volume of training data"
The training-duration examples include approximately 49 days for a 175-billion-parameter model, 35 days for a 110-billion-parameter model, and 34 days for a 13-billion-parameter model under their respective hardware and dataset assumptions.
Technical Deep Dive:
Pre-training is the computationally intensive process through which a foundation model learns statistical patterns, language relationships, and general representations from large datasets.
Unlike fine-tuning, which adapts an existing model, pre-training normally begins with randomly initialized model weights and involves repeated forward propagation, backpropagation, and parameter updates over extremely large token datasets.
The total training duration depends primarily on model parameter count, training-token volume, effective accelerator throughput, cluster size, and distributed training efficiency.
Huawei's training sizing methodology expresses the theoretical end-to-end training duration as:
E_t = 8TP/(nX)
Here, T represents the training-token volume, P the parameter count, n the number of accelerator cards, and X the effective computing performance per card, using consistent units.
Training time increases with the computational workload and decreases as effective available computing power increases.
Other factors include network communication overhead, checkpoint frequency, storage throughput, accelerator utilization, and failures requiring recovery.
The examples establish that large-scale pre-training frequently requires more than a month.
Technical qualification: This is the intended answer for the training examples, not a universal minimum. The same material includes a 27-day example for a 65-billion-parameter model. Smaller models or larger compute clusters can complete pre-training substantially faster.
To lower the data center’s energy consumption, the data-center equipment room uses a hybrid cooling approach of “air and liquid.” Which statement about “air” is correct?
Options:
Natural air cooling
Comfortable air conditioning cooling
Precision air conditioner cooling
Electric fan cooling
Answer:
CExplanation:
Exact Extract — Huawei Training Material, Pages 224 and 240
"AI data centers: new challenges to equipment room and engineering implementation."
"Traditional data center — Cooling: Precision air conditioner"
"New AI data center — Cooling: Hybrid air and liquid cooling"
"Huawei Data Center Practice: Modular, Air-Liquid Converged Architecture, Fast Deployment, and Elastic Evolution"
"Solution: Standardized design for fast deployment; modular solution: air-liquid hybrid and elastic evolution"
"PUE: The annual average PUE can be as low as 1.15"
Technical Deep Dive:
Hybrid air-liquid cooling combines conventional precision air-conditioning systems with liquid-based heat removal to meet the thermal requirements of high-density AI computing environments.
Precision air conditioning is specifically engineered for data centers and other equipment rooms requiring continuous control of temperature, humidity, and airflow.
Unlike comfort air conditioning, which is optimized primarily for human occupancy, precision cooling systems are designed to manage the substantial and continuous sensible heat generated by IT equipment.
Option C is correct because precision air-conditioning equipment provides controlled air-side cooling in data-center environments.
In a hybrid configuration, liquid cooling can remove heat from high-power components such as CPUs and NPUs, while air cooling continues to manage heat generated by other components and the surrounding equipment-room environment.
Liquid-cooling infrastructure may include coolant distribution units, heat exchangers, distribution piping, and liquid-cooled racks.
Option A is not the intended answer. Natural or free cooling may be used in certain facilities, but it does not describe the specific precision-controlled air-cooling component.
Option B is incorrect because comfort air conditioning is not designed for the demanding operating requirements of high-density IT equipment.
Option D is incorrect because fans alone do not constitute a complete cooling system capable of maintaining the required thermal environment.
The combination of precision air cooling and liquid cooling improves thermal-management efficiency and enables higher rack computing density.
Therefore, C is correct.
What are the primary features of the liquid-cooling solution in new AI equipment-room scenarios?
Select all that apply.
Options:
Improved computing power per unit of electricity consumed
1 week go-live
PUE=1.6
Low Capex investment
Answer:
AExplanation:
Exact Extract — Huawei Training Material, Page 241
Under the new-build liquid-cooling data-center solution, the listed features are:
"Energy saving (PUE ≤ 1.15)"
"Adapting to high-density chip evolution"
Technical Deep Dive:
Liquid cooling is an important data-center infrastructure technology for deploying high-density AI computing systems, particularly clusters containing multiple power-intensive Ascend accelerators.
Conventional air cooling can become inefficient when rack power density increases significantly. Liquid cooling transfers heat using liquid coolant, which generally provides more effective heat removal than relying entirely on air circulation.
This enables increased computing density and can reduce cooling-related energy consumption.
Option A is correct. Improved cooling efficiency allows more computing resources to operate within a given facility power and thermal envelope, increasing effective computing capacity per unit of electricity.
Option B is not supported for the specified new-build scenario. The one-week deployment capability described elsewhere in the training concerns integrated computing and networking cluster rollout, not the complete construction and commissioning of a new liquid-cooled AI equipment room.
Option C is incorrect. A PUE of 1.6 is substantially above the PUE ≤ 1.15 target identified for the liquid-cooling solution.
Option D is not a stated feature of the new-build liquid-cooling scenario. Low initial CAPEX is discussed for other deployment scenarios, particularly leasing and certain reconstruction approaches. New liquid-cooling infrastructure can require significant initial investment in CDUs, liquid distribution, manifolds, and cooling equipment.
The primary verified feature is therefore improved energy efficiency and higher computing density.
What functions does the AI tool SCT Info-Finder support in Huawei’s Xinghe Intelligent Network solution?
Select all that apply.
Options:
AI configuration generation
AI virus detection
AI bid analysis
AI intelligent selection
Answer:
A, CExplanation:
Exact Extract — Huawei Training Material, Page 203
"AI-Powered Info-Finder: AI-Based One-Click Q & A for Feature Query, Model Recommendation, and Solution Design"
"DatacomMate is a next-generation intelligent product evolved from Info-Finder. Based on the latest AI technologies and Huawei's official knowledge base, it provides not only general Q & A functions, but also professional assistance for frontline personnel and partners to solve frequently encountered problems."
"Technical exchange and learning"
"Solution design and bidding"
"Onsite delivery"
The same section identifies feature assistance, specification assistance, version mapping, hardware configuration assistance, command assistance, document search, and general Q & A among the available or planned capabilities.
Technical Deep Dive:
Huawei provides several tools to support presales configuration, product selection, solution design, and technical information retrieval.
Info-Finder and its successor DatacomMate provide intelligent access to product knowledge, technical specifications, device capabilities, and configuration-related documentation.
UniSTAR SCT, the Smart Configuration Tool, provides product configuration, solution design, quotation, and product-selection capabilities.
Option A represents the intended configuration-assistance capability. Huawei provides hardware configuration assistance and intelligent configuration functionality through its presales tool ecosystem. However, automatic AI configuration generation is not stated as an exact function of Info-Finder in the relevant training section.
Option B is incorrect. Virus detection is a cybersecurity function and is not identified as a primary capability of the Info-Finder or SCT presales tools.
Option C represents the intended bidding-assistance capability. Huawei's presales tools support solution design, bidding documentation, product comparison, and quotation preparation. The precise term AI bid analysis is not independently established in the uploaded training section.
Option D is correct. Huawei Info-Finder supports intelligent device-model selection, enabling users to identify suitable products according to technical requirements.
Official Huawei Info-Finder documentation confirms the Intelligent Model Selection function.
What are the main functions of the KV cache during inference for an AI foundation model?
Select all that apply.
Options:
Significantly improve inference efficiency
Improve the utilization of HBM
Improve computing power utilization
Reduce repeated calculations in the inference steps
Answer:
A, DExplanation:
Exact Extract — Huawei Training Material, Pages 92, 167 and 168
"High memory usage for long sequences"
"The longer the sequence length (N + m, input + output), the higher the memory usage and the greater the inference resource consumption."
"Repeated computation of a large number of historical tokens results in high TTFT"
"Identify and match historical prefix cache by the unique hash code to eliminate repeated computing via querying and improve the inference throughput by 43%"
The inference architecture also distinguishes the prefill stage from incremental decoding, during which previously generated KV-cache information is reused.
Technical Deep Dive:
The Key-Value (KV) cache is a fundamental optimization technique used during autoregressive Transformer inference.
In Transformer attention, each token is represented by query, key, and value vectors. During autoregressive text generation, the model generates tokens sequentially and repeatedly attends to previously processed tokens.
Without KV caching, previously calculated attention key and value representations would need to be recomputed unnecessarily during subsequent decoding steps.
The KV cache stores these representations so that they can be reused.
Option A is correct. Reusing previously calculated attention states reduces redundant computation and improves inference execution efficiency.
Option D is correct. Avoiding repeated calculations is the principal mechanism by which KV caching accelerates autoregressive inference.
Option B is not a direct function of KV caching. HBM provides high-bandwidth memory for model weights, activations, and cached attention states. KV caching consumes HBM capacity rather than inherently increasing its utilization efficiency.
Option C is not a primary guaranteed function. KV caching can improve useful computational throughput, but its effect on hardware utilization depends on memory bandwidth, concurrency, and the inference scheduler.
For long-sequence workloads, the KV cache can become a significant memory bottleneck.
Huawei addresses this through hierarchical caching, memory compression, and cache offloading in its inference acceleration architecture.
The primary functions are therefore reducing repeated computation and improving inference efficiency.
In data-center networks, Huawei’s proposed Xinghe Intelligent Network solution supports network automation, service automation, and operations-and-maintenance automation. Which of the following is a key feature used by this solution to enable service automation?
Options:
Network-level load balancing (NSLB)
Hitless upgrade
Network simulation verification
Runbook framework orchestration
Answer:
DExplanation:
Exact Extract — Huawei Training Material, Page 193
"Xinghe AI Fabric: AI-Powered Algorithms, Automating Network Service O & M"
"Network automation + service automation"
"Orchestration through the runbook framework, shortening the service rollout period"
"Runbook: Orchestrates atomic APIs into runbook workflows based on a specified sequence and logic to customize network service provisioning, enabling E2E automated deployment and significantly improving O & M efficiency."
"Simulation & verification: pre-event simulation and post-event verification for configuration changes"
Technical Deep Dive:
Runbook framework orchestration is a central automation capability within Huawei Xinghe Intelligent Data Center Network.
A runbook represents a predefined operational workflow that combines individual automation tasks into a coordinated process.
These tasks can include device configuration, policy deployment, connectivity validation, service activation, and post-deployment verification.
Huawei's architecture uses atomic APIs as reusable automation building blocks.
Each API performs a specific function. The runbook framework organizes these functions into a sequence governed by predefined conditions and execution logic.
For example, deploying a new application network service may require VLAN or VXLAN provisioning, routing configuration, security-policy installation, and connectivity testing.
Instead of performing each operation manually, the runbook framework can coordinate the workflow.
This reduces repetitive administration and improves consistency across deployments.
Option A is incorrect because NSLB focuses on network traffic distribution and load balancing for improved performance.
Option B is incorrect because hitless upgrade supports maintenance continuity rather than service workflow orchestration.
Option C is incorrect because simulation verification evaluates the expected effects of changes and helps reduce operational risks.
Option D is correct because the Runbook framework directly enables automated service provisioning and coordinated deployment.
On Huawei network devices, administrators can use diagnostic commands such as `display interface brief` and `display current-configuration` to verify relevant device state and configuration, although automated workflows may use controller APIs instead of interactive CLI sessions.
Therefore, Runbook framework orchestration is the correct answer.
TaiShan is a Huawei-developed server product built on Kunpeng.
Options:
TRUE
FALSE
Answer:
AExplanation:
Exact Extract — Huawei Training Material, Pages 116 and 123
"Kunpeng Open Full-Stack Capabilities to Enable Innovation for All Industry Partners"
"TaiShan servers, setting an industry design benchmark for Kunpeng computing systems"
"TaiShan 200 series servers cover all scenarios, setting an industry benchmark for Kunpeng servers"
The TaiShan 200 product overview identifies high-density, entry-level, balanced, storage-oriented, high-performance, and edge server configurations.
Technical Deep Dive:
TaiShan is Huawei's server product family based on the Kunpeng processor architecture.
Kunpeng processors use ARM-based computing technology and are designed for general-purpose computing workloads requiring scalable processing capacity, energy efficiency, and enterprise-level reliability.
TaiShan servers provide the hardware infrastructure needed to deploy Kunpeng-based computing solutions in data centers and enterprise environments.
The TaiShan 200 series includes configurations optimized for different workloads, such as virtualization, distributed storage, databases, big-data processing, and high-performance computing.
Depending on the model, the systems provide different processor configurations, storage capacities, PCIe expansion capabilities, and memory configurations.
Huawei supports the hardware ecosystem through openEuler, openGauss, Kunpeng DevKit, and Kunpeng BoostKit.
openEuler provides an operating-system ecosystem, while openGauss supplies an open-source database platform.
Kunpeng DevKit supports software migration and development, and Kunpeng BoostKit provides application optimization capabilities.
Together, these products establish a hardware-software ecosystem designed to improve application compatibility and computing performance.
For presales purposes, TaiShan should be distinguished from Huawei Atlas systems.
TaiShan servers are primarily general-purpose computing systems based on Kunpeng processors, while Atlas systems are designed around Ascend AI acceleration capabilities.
Therefore, the statement is true.
Which aspects of intelligent-computing data centers impose high requirements on O & M assurance?
Select all that apply.
Options:
Cluster training is interrupted due to a single device fault.
The performance of a single node in the cluster affects the overall performance.
Training of trillion parameter models is a large-scale application for the entire system, involving a large number of components.
An intelligent computing server has eight cards, and a single card failure does not affect the training.
Answer:
A, B, CExplanation:
Exact Extract — Huawei Training Material, Pages 57 and 69
"Large scale does not mean strong computing power, and building large computing clusters faces many challenges"
"Cluster availability"
"Frequent failures of core components"
"Difficult cross-domain fault handling"
"Slow recovery of training tasks"
"Cross-domain fault detection and diagnosis for compute, network, and storage"
"High throughput checkpoint access and storage"
"System high availability = as long as possible failure-free running time + as short as possible fault recovery time"
The resumable-training architecture also identifies fault detection, task rescheduling, checkpoint loading, collective communication initialization, and training resumption as essential recovery activities.
Technical Deep Dive:
Large-scale AI training environments contain numerous interconnected components, including Ascend NPUs, Kunpeng CPUs, server memory, network switches, optical transceivers, and distributed storage systems.
Training workloads frequently use synchronous distributed computation, making application performance and availability dependent on the health of multiple devices.
Option A is correct. A single critical hardware failure can interrupt a distributed training job when the affected device participates in required computation or synchronization.
Fault-tolerant training mechanisms can reduce the impact, but uninterrupted execution is not guaranteed.
Option B is correct. Distributed training performance can be constrained by a slow or degraded node.
When synchronization is required, faster nodes may wait for slower participants before continuing to the next training step.
This behavior is commonly known as the straggler effect .
Option C is correct. Trillion-parameter models require large-scale distributed computing infrastructure containing many interdependent hardware and software components.
The resulting complexity creates substantial requirements for fault monitoring, root-cause analysis, and operational coordination.
Option D is incorrect. Failure of a single accelerator card can affect the entire training workload, especially when the device holds a required portion of the model or participates in collective communication.
Huawei addresses these challenges through CCAE cluster management, checkpoint recovery, hardware fault prediction, and automated training resumption.
Therefore, A, B, and C are correct.
The cluster training solution enables model training at the 10-billion-, 100-billion-, and 1-trillion-parameter levels, and offers multiple mature networking solutions for flexible scaling.
Options:
TRUE
FALSE
Answer:
AExplanation:
Exact Extract — Huawei Training Material, Page 63
"From 100 billion to 100 billion to trillion model training, multiple mature networking solutions support flexible and scalable expansion"
"Two-level box networking — 1:1 converged networking, which provides good universality and scalability"
"Applicable to small-and medium-scale AI clusters, supporting training of 10 billion or 100 billion parameter models"
"Two-level frame-box networking — 1:1 converged networking, which can meet the requirements of larger-scale networking"
"Applicable to large-scale AI clusters, supporting training of 100 billion or 1 trillion parameter models"
The same section identifies three-level switch networking for ultra-large-scale clusters training models exceeding one trillion parameters.
Technical Deep Dive:
Huawei's large-model cluster training architecture supports distributed training across different computing scales.
The architecture is designed to evolve as model size, accelerator requirements, communication bandwidth, and storage capacity increase.
For models containing tens of billions of parameters, a relatively small or medium-scale Ascend computing cluster may provide sufficient resources.
As model parameter counts increase toward hundreds of billions or trillions, more complex distributed training techniques become necessary.
These include data parallelism, tensor parallelism, pipeline parallelism, and expert parallelism for Mixture of Experts models.
Each parallelism strategy creates different communication requirements.
For example, tensor parallelism often requires frequent communication between accelerators, while pipeline parallelism involves transferring intermediate activations between model stages.
Huawei provides different networking architectures to accommodate these requirements.
Two-level box networking supports smaller deployments, while two-level frame-box networking provides additional scalability for larger clusters.
Three-level switch networking is intended for ultra-large-scale deployments.
The underlying infrastructure must also provide high-bandwidth storage access, effective collective communication, fault tolerance, and centralized cluster management.
Huawei integrates these requirements through Ascend computing hardware, high-speed networking, AI storage, MindSpeed, CANN, and CCAE.
Therefore, the statement is true.
Which of the following statements accurately describe the data-affinity feature of the Application Enablement Suite BoostKit?
Options:
Local Computing
Parallel Processing
Algorithm Acceleration
Full-lifecycle Security
Answer:
AExplanation:
Exact Extract — Huawei Training Material, Page 131
"BoostKit for Kunpeng application enablement, delivering ultimate performance and making Kunpeng 'easy to use'"
"BoostKit: High-performance open source components + acceleration software packages + reference implementation"
"Full Stack Optimization"
"Local Computing"
"Algorithm Acceleration"
"Parallel Processing"
"Full-lifecycle Security"
"Data affinity: load optimization for the entire data processing process"
Technical Deep Dive:
Data affinity is a performance optimization principle that aims to keep computational tasks close to the data they process.
Modern multi-core server systems frequently use Non-Uniform Memory Access (NUMA) architectures. In NUMA systems, memory access latency can vary depending on the relationship between the executing processor and the physical location of the memory.
When an application accesses memory associated with a remote NUMA node, it may experience increased memory latency and additional interconnect traffic.
Local computing reduces these inefficiencies by placing processing tasks near their associated data.
Huawei Kunpeng BoostKit incorporates data-affinity optimization to improve resource locality and reduce unnecessary data movement.
This approach is especially valuable for databases, distributed data-processing applications, high-concurrency services, and memory-intensive workloads.
On Linux-based Kunpeng systems, engineers can investigate NUMA placement using tools such as `numactl`, `lscpu`, and `numastat`.
For example, `numactl --hardware` displays the system's NUMA topology, while `numastat` helps identify local and remote memory-access behavior.
The broader BoostKit optimization framework also includes parallel processing, algorithm acceleration, and security improvements, but these represent distinct optimization dimensions.
Data affinity most directly corresponds to local computing , making option A correct.
Which of the following computing capabilities has expanded from the device side into the server market and become a new choice for general computing?
Options:
ARM
x86
MIPS
RISC-V
Answer:
AExplanation:
Exact Extract — Huawei Training Material, Page 113
"ARM is aggressively expanding into the traditional x86 market, showing clear advantages in data center scenarios and emerging as the preferred architecture for general-purpose computing innovation"
Technical Deep Dive:
ARM is a processor architecture based on Reduced Instruction Set Computing (RISC) principles. It initially achieved widespread adoption in mobile phones, embedded systems, and other energy-sensitive devices because of its favorable performance-per-watt characteristics.
The development of higher-performance, multi-core ARM processors has enabled the architecture to expand into enterprise servers, cloud computing, and data-center workloads.
Huawei's Kunpeng processor family demonstrates this transition. Kunpeng processors use ARM-based architecture and provide the computing foundation for Huawei TaiShan general-purpose servers.
The TaiShan server portfolio targets enterprise workloads such as cloud computing, virtualization, databases, big-data processing, and distributed applications.
ARM-based server platforms can provide advantages in energy efficiency, parallel processing, and computing density. These characteristics are particularly relevant to modern data centers, where power consumption and operating expenditure affect total cost of ownership.
However, processor architecture alone does not determine application performance. Software compatibility, operating-system support, compiler optimization, memory bandwidth, and application characteristics must also be considered.
Huawei supports ARM-based computing through its Kunpeng hardware ecosystem, openEuler operating-system ecosystem, and application enablement and development tools.
Unlike ARM, x86 was already established in the server market. MIPS and RISC-V are alternative instruction-set architectures but do not represent the specific device-to-server market expansion described here.
Therefore, ARM is the correct answer.
What are the main highlights of Huawei AI storage for AI training?
Select all that apply.
Options:
Multi-protocol interworking and zero-copy data transfer improve the efficiency of the entire AI process. The performance and capacity can be expanded on demand to smoothly evolve to ultra-large clusters of 10,000 or 100,000 cards, multimodal models, and models with trillions of parameters.
Multi-level reliability mechanism ensures zero data loss and zero service interruption, thereby guaranteeing stable running of AI services.
Integrated storage and compute data direct access, supporting Ascend NDS and NVIDIA GDS, enabling efficient data read/write through direct data access to computing power.
10 TB bandwidth and hundreds of millions of IOPS deliver ultimate performance. Data loading and checkpoint loading after a breakpoint or fault recovery are now completed in seconds instead of hours, improving cluster utilization.
Answer:
A, B, C, DExplanation:
Exact Extract — Huawei Training Material, Pages 64 and 162–165
"Efficient management and utilization of EB-level data through compute-storage collaboration, accelerating the training of multimodal models with trillions of parameters"
"Fully symmetric 512-node scale-out architecture, with EB-level on-demand expansion."
"Multi-protocol interworking, zero data migration, and automatic tiering of hot and warm data"
"High Reliability: Building Multi-level Reliability Mechanism to Ensure 0 Data Loss and 0 Service Interruption, Guaranteeing Stable Running of AI Services"
"Direct Data Access through Compute-Storage Collaboration: Huawei AI Storage Supports GPU Direct Storage and NDS Working Seamlessly with Ascend, Breaking Through Memory Access Bottlenecks and Enabling Efficient Direct Data Access"
"Data loading and checkpoint loading after breakpoints or failures reduced from hours to seconds"
Technical Deep Dive:
Huawei AI Storage is designed to overcome the data-access, storage scalability, and reliability bottlenecks encountered during large-scale foundation-model training.
Option A is correct. Multi-protocol interoperability, intelligent data tiering, and scalable storage architecture enable large AI clusters to access heterogeneous training data efficiently.
Huawei's OceanStor A Series and OceanStor Pacific platforms support the requirements of high-performance and high-capacity storage environments.
Option B is correct as a description of Huawei's stated reliability design. The solution incorporates node-level redundancy, system-level fault tolerance, end-to-end data verification, snapshots, and replication mechanisms.
However, zero data loss requires appropriate protection mechanisms, such as synchronous replication with RPO = 0. Zero interruption is a design objective under specified failure conditions, not an unconditional guarantee against every possible failure.
Option C is correct. Ascend NPU Direct Storage (NDS) and NVIDIA GPU Direct Storage (GDS) optimize storage-to-compute data movement and reduce unnecessary CPU involvement.
Option D is correct. Huawei identifies high aggregate storage bandwidth and hundreds of millions of IOPS as important capabilities for large AI clusters.
Fast data loading and checkpoint operations reduce accelerator idle time and improve useful training throughput.
Huawei's OceanStor A800 architecture also supports large-scale expansion and high-performance checkpoint access.
Technical clarification: The stated “10 TB bandwidth” should be expressed as approximately 10 TB/s aggregate bandwidth when describing throughput. These performance figures are solution-scale capabilities or targets rather than universal performance guarantees for every storage deployment.
On which plane are read and write operations for sample data carried out between compute nodes and storage nodes?
Options:
Management plane
Sample plane
Service plane
Parameter plane
Answer:
BExplanation:
Exact Extract — Huawei Training Material, Page 66
"Sample plane: Reads and writes sample data between compute nodes and storage nodes."
Technical Deep Dive:
The sample plane is the dedicated network responsible for transferring training datasets, checkpoint files, and other sample-related information between AI computing nodes and storage systems in Huawei's large-model training infrastructure.
Modern distributed AI training requires enormous quantities of data to be continuously delivered to computing devices. If the data-transfer infrastructure cannot sustain the required throughput, Ascend NPUs become idle while waiting for training samples, reducing effective computing utilization.
Huawei separates the networking architecture into functional planes to prevent different traffic types from interfering with one another.
The sample plane carries high-bandwidth storage I/O associated with training samples and checkpoints. The parameter plane handles synchronization of model parameters and distributed training communications between computing nodes. The service plane supports service delivery, scheduling, and platform communications, while the management plane supports infrastructure administration and monitoring.
This logical separation improves network isolation, scalability, and performance predictability.
In typical Huawei AI training architectures, high-performance Ethernet and RoCE-based networks can be deployed to meet the data movement requirements of large-scale clusters.
The critical distinction is that sample-data read and write operations use the sample plane , whereas parameter synchronization and platform administration use their respective networks.
Which statement about the new TaiShan 200 model server is correct?
Options:
Up to 10 PCIe slots
Supports 920 processors
Does not support NVMe SSDs
Temperature range: 5°C to 35°C
Answer:
A, B, DExplanation:
Exact Extract — Huawei Training Material, Page 125
"2U2P new model server specifications"
"Form Factor — 2U2-way"
"CPU — 2 x 920 processors, up to 64 cores and 2.9 GHz"
"Memory — 32 x DDR5 DIMMs, up to 4800 MT/s, 4 TB maximum memory (128 GB memory configuration)"
"PCIe Expansion — Up to 10 PCIe slots"
"Temperature Range — 5°C to 35°C"
The storage configurations additionally include 16 or 24 2.5-inch NVMe drives, subject to the specified compatible SAS/SATA drive configurations.
Technical Deep Dive:
Huawei's new-generation TaiShan 200 2U2P server combines Kunpeng computing resources with high-capacity memory, flexible storage, and expanded I/O connectivity.
Option A is correct. The specified 2U2P model supports up to 10 PCIe expansion slots. PCIe connectivity enables the installation of networking, storage, and other compatible expansion devices, allowing the server to be adapted for different workloads.
Option B is correct. The server supports two Kunpeng 920 processors. These ARM-based processors are intended for enterprise computing applications requiring multi-core processing, scalability, and energy-efficient operation.
Option C is incorrect. NVMe SSD support is explicitly included. NVMe storage uses PCIe connectivity to deliver low-latency and high-throughput storage access, making it particularly valuable for databases and data-intensive applications.
Option D is correct. The specified model has an operating temperature range of 5°C to 35°C.
This range is important when planning cooling capacity and selecting an appropriate data-center deployment environment.
The server also supports DDR5 memory, providing a higher-bandwidth memory platform than earlier DDR4-based configurations.
Critical question-quality correction: The original question is framed as single-choice, but A, B, and D are all explicitly correct for the 2U2P model on page 125. It must be converted into a multiple-answer question to be technically valid. Selecting D alone, as implied by the original question explanation, would incorrectly exclude two supported specifications.
Which statement about TaiShan 200 series servers is not incorrect?
Options:
MTBF 150,000 hours
Supporting outdoor deployment
Triple anti-vibration hard disk & carrier-class components
112G high-speed interconnection (CPU and I/O connection rate)
Answer:
A, C, DExplanation:
Exact Extract — Huawei Training Material, Page 123
"TaiShan 200 series servers cover all scenarios, setting an industry benchmark for Kunpeng servers"
"High-speed interconnection — 112G high-speed interconnection (CPU and I/O connection rate)"
"Quality control — MTBF 150,000 hours"
"Reliable design — Triple anti-vibration hard disk & carrier-class components"
"20+ years of engineering experience — Solid and stable performance"
Technical Deep Dive:
Huawei TaiShan 200 series servers are designed to deliver reliable, scalable computing performance for enterprise and data-center workloads.
Option A is correct. The training identifies a mean time between failures (MTBF) figure of 150,000 hours as a product reliability characteristic.
MTBF is a statistical reliability measure representing expected operating time between failures in a defined equipment population. It does not guarantee that an individual server will operate continuously for that duration.
Option B is incorrect. Standard TaiShan 200 data-center rack servers are not universally designed for direct outdoor deployment. Edge-oriented variants may support broader environmental conditions, but outdoor suitability requires verification of the exact enclosure, ingress protection, and operating environment.
Option C is correct. The training explicitly identifies triple anti-vibration hard-disk design and carrier-class components as reliability characteristics.
Vibration resistance is important in high-density storage environments because mechanical vibration can impair hard-disk performance and reliability.
Option D is correct. Huawei identifies 112G high-speed interconnection as a TaiShan 200 series characteristic associated with CPU and I/O connectivity.
High-speed internal interconnection contributes to the efficient movement of data between processors, memory, and I/O subsystems.
Question-quality warning: The original wording uses the singular statement and a double negative, but three options are supported. It should be revised to: “Which of the following statements about TaiShan 200 series servers are correct? (Select all that apply.)” This correction is necessary to produce an unambiguous examination question.
The CCAE Cluster Operation and Management System shifts cluster management from “single-domain mode” to “centralized governance,” enabling complete visibility and control of training job paths throughout the system.
Options:
TRUE
FALSE
Answer:
AExplanation:
Exact Extract — Huawei Training Material, Page 70
"Cluster management is transitioning from 'single-domain' to 'centralized,' and the training job paths are now globally visible and manageable."
Technical Deep Dive:
Huawei's CCAE cluster operation and management system provides centralized monitoring, troubleshooting, and operational management for large-scale Ascend AI computing clusters.
Traditional infrastructure management often relies on separate tools for computing, networking, and storage systems.
This fragmented approach makes cross-domain fault diagnosis difficult because a training failure may originate from an accelerator, optical connection, network switch, storage subsystem, or software component.
CCAE addresses these challenges by integrating operational information across multiple infrastructure domains.
The system supports pre-training health checks, fault detection, cross-domain fault demarcation, root-cause analysis, and coordinated recovery.
Centralized monitoring makes it possible to trace training workloads across the infrastructure and correlate job abnormalities with component-level events.
The solution also helps administrators identify degraded network performance, hardware faults, and storage bottlenecks that can affect distributed training.
For example, a communication failure involving an optical module can potentially disrupt parameter synchronization across multiple Ascend nodes.
Centralized diagnosis helps identify the affected infrastructure component more efficiently than independent troubleshooting within each domain.
The resulting improvements in observability and operational coordination reduce troubleshooting complexity, shorten recovery time, and improve large-scale training availability.
Therefore, the statement is correct.
The operating system is the key to unlocking diverse computing power and the soul of the information technology industry.
Options:
TRUE
FALSE
Answer:
AExplanation:
Exact Extract — Huawei Training Material, Pages 116 and 127
"Kunpeng Open Full-Stack Capabilities to Enable Innovation for All Industry Partners"
"Open source OS openEuler, providing community editions"
"OSVs develop commercial OS distributions based on the community edition"
"Open source foundational software, build a prosperous ecosystem through industry collaboration, and create a reliable software foundation"
Technical Deep Dive:
An operating system provides the fundamental software environment through which applications access and utilize hardware resources.
It manages processor scheduling, system memory, storage devices, network interfaces, process execution, and hardware abstraction.
Without a compatible operating system, the computational capabilities of a processor architecture cannot be effectively exposed to enterprise applications.
This is particularly important for heterogeneous and ARM-based computing platforms, where operating-system compatibility affects application portability and hardware utilization.
Huawei's Kunpeng computing ecosystem uses openEuler as an important operating-system foundation.
openEuler provides an open-source platform that can support enterprise servers, cloud computing, edge infrastructure, and other computing environments.
The operating-system kernel coordinates access to Kunpeng processor capabilities and supports the execution of applications compiled for the relevant instruction-set architecture.
Operating-system integration also affects NUMA scheduling, memory allocation, network processing, virtualization, security, and system reliability.
Huawei complements this software foundation with Kunpeng DevKit for application migration and development, and Kunpeng BoostKit for application-level optimization.
The phrase soul of the information technology industry is figurative rather than a technical specification. It emphasizes the central role of operating systems in connecting hardware innovation with practical software ecosystems.
The statement is therefore correct as a description of the operating system's strategic importance.