HCSP-Field-SQA V1.0 Questions and Answers
To which dangerous-goods class do lithium batteries belong?
Options:
Class 2 - Gases
Class 1 - Explosives
Class 9 - Other dangerous goods
Class 3 - Flammable liquids
Answer:
CExplanation:
Exact Extract — Definition and Classification of Dangerous Goods (PDF page 46, training slide 6)
Class 9 Miscellaneous dangerous substances and articles.
The classification diagram identifies lithium battery products and energy-storage systems under the Class 9 category and illustrates the corresponding dangerous-goods labels.
Technical Deep Dive:
Lithium batteries are classified as Class 9 miscellaneous dangerous goods under the United Nations dangerous-goods classification framework.
Option C is correct. Class 9 encompasses hazardous substances and articles that present risks during transportation but are not more appropriately classified under Classes 1–8.
Lithium batteries can present fire, electrical, and thermal hazards, particularly when damaged, improperly packaged, short-circuited, or exposed to excessive temperatures.
Relevant transport classifications include UN 3480 for lithium-ion batteries shipped separately and UN 3481 for lithium-ion batteries packed with or contained in equipment.
Other classifications may apply depending on the battery chemistry, product configuration, and transport arrangement.
Option A is incorrect. Class 2 primarily concerns gases.
Option B is incorrect. Class 1 covers explosives; lithium batteries are not classified as Class 1 merely because they can experience violent thermal failures.
Option D is incorrect. Class 3 covers flammable liquids rather than lithium batteries as complete transport articles.
Class 9 classification has practical implications for packaging, labeling, documentation, carrier qualifications, storage, and transportation requirements.
Certain smaller lithium batteries may qualify for specific regulatory exemptions or reduced requirements, but this does not change the underlying Class 9 hazard classification.
Final verification: C.
During an accident at energy storage plant C, a leak in the cooling system caused a battery short circuit. Consequently, electronic components caught fire, resulting in thermal runaway. However, an emergency plan had been prepared before the project kick-off, and after the fire began, experts continued communicating with the fire department and offered many effective suggestions. Therefore, the accident did not significantly affect the surrounding area.
Options:
True
False
Answer:
AExplanation:
Exact Extract — Safety Accident Cases 3/4: Energy Storage Plant Accident (PDF page 147, training slide 6)
The leakage in the cooling system caused a battery short circuit. As a result, electronic components were on fire, causing thermal runaway. The fire occurred in the adjacent battery compartment of a container and then spread to the next container, eventually to the entire ESS.
Before the project kick-off, an emergency plan had been made and emergency drills had been conducted. Therefore, after the fire broke out, all personnel quickly evacuated, and no casualties were caused onsite.
Technical Deep Dive:
The described accident demonstrates how failures in battery thermal-management infrastructure can initiate severe cascading events within an energy-storage system.
A cooling-system leak can introduce conductive liquid or moisture into areas containing electrical connections and battery components. Under hazardous conditions, insulation failure and short circuits can create electrical arcing, localized overheating, and ignition.
When battery cells experience uncontrolled temperature rise, thermal runaway may occur. The resulting heat and gas generation can propagate to adjacent modules, battery compartments, or storage containers.
The incident also illustrates the importance of emergency preparedness.
The project had established an emergency plan and conducted drills before construction and commissioning activities. As a result, personnel understood the emergency response requirements and evacuated promptly when the accident occurred.
The supplier ' s experts coordinated with the fire department and recommended measures to reduce the possibility of fire propagation.
Rather than opening the affected battery containers, emergency responders concentrated on cooling surrounding areas and preventing the incident from spreading.
Although the fire damaged two battery containers and caused substantial financial losses, the case records no onsite casualties and no obvious pollution of local air and water resources.
The distinction is important: the statement does not mean that the accident was minor or that the energy-storage equipment escaped serious damage. It means that the emergency response limited the surrounding consequences.
Final verification: A.
EHS management is intended for operations personnel involved in delivering and maintaining Digital Power products. Which of the following personnel types are included?
Select All that Apply.
Options:
Temporary staff
Onsite visitor
Onsite engineer
Subcontractor personnel
Answer:
A, B, C, DExplanation:
Exact Extract — EHS Objectives and Scope (PDF page 6, training slide 5)
EHS management is intended for operators involved in the delivery and maintenance of Digital Power products, including Huawei engineers, partner engineers, subcontractor personnel, temporary personnel, and onsite visitors.
Technical Deep Dive:
Environment, Health, and Safety (EHS) management applies to all individuals who may be exposed to operational hazards during Huawei Digital Power project delivery, construction, commissioning, and maintenance activities.
All four options are correct.
Option A — Temporary staff: Temporary personnel must comply with relevant safety instructions, protective equipment requirements, and site-access procedures. Employment duration does not reduce safety obligations.
Option B — Onsite visitor: Visitors may encounter electrical hazards, moving equipment, lifting operations, restricted areas, or other construction risks. Appropriate safety orientation, supervision, and protective equipment are necessary.
Option C — Onsite engineer: Huawei and partner engineers must follow approved operating procedures, possess relevant qualifications, and implement the appropriate protective measures.
Option D — Subcontractor personnel: Subcontractors must comply with applicable EHS requirements and demonstrate the competence necessary for their assigned activities.
Huawei ' s EHS management framework is based on preventing personal injury, equipment damage, and environmental pollution.
Its stated objectives include zero accidents, zero injuries, and zero pollution.
The same principles apply regardless of whether personnel are directly employed by Huawei, a certified service partner, or a subcontracting organization.
Project management must therefore establish appropriate induction, authorization, supervision, and safety controls for everyone entering affected work areas.
Final verification: A, B, C, D.
Whom should the SQA notify to follow up on rectification when any failure is identified during the environment check?
Options:
Installation engineer
Project director (PD)
Supervision engineer
Owner/Customer
Answer:
CExplanation:
Exact Extract — Environment Management: The SQA Supervises the Completion of Environment Survey (PDF page 265, training slide 20)
Before the equipment enters the site, the SQA checks the environment survey report provided by the supervision engineer and initiates handling according to different results.
1. Environment requirements are met: The SQA notifies Huawei of delivery.
2. Environment requirements are not met: The SQA notifies the supervision engineer to track the rectification. If the rectification requirements are met, the SQA notifies Huawei of delivery. If the rectification is not performed or the requirements are not met, organize the owner, Huawei, and EPC to handle the problem. After an agreement is reached through discussion, notify Huawei of delivery.
Technical Deep Dive:
Environment verification is an important quality control activity before Huawei Digital Power equipment is delivered to or installed at a project site.
Option C is correct because the supervision engineer is the designated person to follow up on rectification when an environmental nonconformity is identified.
The SQA reviews the environment survey report and determines whether the storage and installation conditions satisfy the applicable product specifications.
These checks may include environmental temperature, humidity, ventilation, installation clearance, foundation conditions, electrical safety, and protection against water or dust ingress.
When the requirements are not met, the SQA notifies the supervision engineer to coordinate and monitor corrective actions.
The supervision engineer must follow the rectification process and confirm whether the deficiencies have been corrected.
If the environment subsequently meets the requirements, the SQA can notify Huawei to proceed with delivery.
If rectification is incomplete or unsuccessful, the issue must be escalated for coordination among the owner, Huawei, and EPC.
This process establishes a clear relationship between quality oversight, corrective-action implementation, and project escalation.
Final verification: C.
Which of the following is not part of EHS management during operations?
Options:
Prevent risks based on the key points of construction safety risk control.
Appraise the work efficiency of on-boarding personnel.
Review the qualifications of special operation personnel.
Check that operation personnel wear PPE during operation.
Answer:
BExplanation:
Exact Extract — Safety Operation Requirements for Digital Power Products (PDF page 9, training slide 8)
Personal safety has the highest priority. The operators are primary owners for safety operations. Safety is based on operator qualification, PPE protection, professional tools, and operation standardization.
Additional Extract — Onsite EHS Management: Temporary Power Consumption Cases (PDF page 36, training slide 35): Electricians must have electrician certificates. At least two electricians are required onsite. One is responsible for operation and the other for supervision and recording. Electricians must wear qualified PPE. Check the grounding and leakage protection of the equipment.
Technical Deep Dive:
Environment, Health, and Safety (EHS) management focuses on preventing accidents, protecting personnel, and ensuring that construction and maintenance activities are performed safely.
Option B is correct because evaluating the general work efficiency of newly onboarded personnel is a productivity or personnel performance activity rather than a defined operational EHS risk-control measure.
Personnel performance assessments may support broader organizational management, but they are distinct from the immediate controls required to manage workplace hazards.
Option A represents an essential EHS responsibility. Supervisors must identify and control risks associated with electrical work, lifting operations, work at heights, battery handling, and other hazardous construction activities.
Option C is an important preventive control. Personnel conducting regulated or high-risk activities must possess the qualifications and certifications required by applicable regulations and Huawei ' s service requirements.
Option D is also a fundamental safety measure. Supervisors must verify that personnel wear appropriate protective equipment based on their assigned activities and exposure risks.
Examples include insulated gloves and footwear during electrical work, safety harnesses during work at heights, and suitable eye protection during drilling or cutting.
Effective EHS management prioritizes hazard prevention, procedural compliance, and the protection of people and equipment.
Final verification: B.
Lithium batteries must be stored in a dry, clean, well-ventilated area that is free of strong infrared-radiation sources, organic solvents, and corrosive gases. Do not expose lithium batteries to sunlight or water, and keep them well away from ignition sources.
Options:
True
False
Answer:
AExplanation:
Exact Extract — Case 2: Water Enters the Device in the Open-Air Storage Environment (PDF page 266, training slide 21)
Install batteries in a dry, clean, and ventilated environment that is free from sources of strong infrared radiation, organic solvents, and corrosive gases. Do not expose the ESMs to sunlight or water and keep them far away from sources of ignition.
Technical Deep Dive:
Appropriate lithium battery storage conditions are critical to preserving battery reliability, preventing degradation, and controlling fire and electrical safety risks.
Option A is correct because the statement matches Huawei ' s prescribed battery storage precautions.
A dry environment reduces the risk of moisture penetration, corrosion, insulation degradation, and electrical faults.
Clean storage conditions minimize contamination from dust, metallic particles, and other foreign materials.
Adequate ventilation supports environmental control and reduces the accumulation of hazardous substances if abnormal battery behavior occurs.
Protection from direct sunlight and strong infrared radiation prevents unnecessary heat exposure, which can accelerate battery aging and increase thermal stress.
Organic solvents and corrosive gases may damage enclosures, electrical contacts, seals, and other components.
Separation from ignition sources is particularly important because batteries can release combustible gases under certain failure conditions.
The training material also identifies a storage temperature range of 0–40°C, with 20–30°C recommended, and relative humidity not exceeding 95% for the illustrated lithium battery storage case.
Actual storage limits must always follow the applicable battery product documentation.
Final verification: A.
Waste energy-storage batteries may be disposed of with household waste.
Options:
True
False
Answer:
BExplanation:
Exact Extract — Precautions for Battery Recycling (PDF page 200, training slide 59)
Dispose of waste batteries in accordance with local laws and regulations. Do not dispose of batteries as household waste. Improper disposal of batteries may result in environmental pollution or an explosion.
If a battery leaks or is damaged, contact technical support or a battery recycling company for disposal.
Technical Deep Dive:
Waste energy-storage batteries require controlled collection, transportation, recycling, and disposal because they contain potentially hazardous materials and may retain significant electrical energy after removal from service.
Lithium-ion batteries commonly used in Huawei Digital Power energy-storage solutions contain electrochemical cells, electrolyte, metallic conductors, and other components that require appropriate end-of-life management.
Improper disposal creates several major risks.
Electrical and fire hazards: Discarded batteries can retain sufficient energy to initiate short circuits if terminals contact conductive materials. Mechanical damage, crushing, or exposure to excessive temperatures can initiate thermal runaway, potentially resulting in fire or explosion.
Environmental hazards: Damaged battery cells may release electrolyte or other substances that can contaminate the surrounding environment. Recycling through authorized facilities enables appropriate handling and recovery of valuable materials.
Transportation risks: Damaged, defective, or end-of-life lithium batteries may be subject to dangerous-goods transport requirements. Their classification, packaging, marking, documentation, and transport conditions must follow applicable local and international regulations.
For SQA personnel, compliance includes verifying that waste batteries are segregated, appropriately stored, and transferred to authorized recycling or waste-management organizations.
Damaged or leaking batteries require additional precautions, including preventing further mechanical damage and monitoring for abnormal heating, smoke, or electrolyte leakage.
Disposal through ordinary municipal household-waste channels is therefore prohibited.
Final verification: The statement is false.
What is the prescribed time for carrying out operations such as service cutover, data setting, removing and inserting important boards while powered on, loading, and power-off reset in the industry?
Options:
21:00 to 2:00. For the time of performing such major operations on special products, the device specifications shall prevail.
9:00 to 18:00. For the time of performing such major operations on special products, the device specifications shall prevail.
Any time
Subjected to the customer’s approval time. The recommended time is 00:00 to 6:00. For the time of performing such major operations on special products, the device specifications shall prevail.
Answer:
DExplanation:
Exact Extract — Partner Successful Practice: Service Consistency Applied to a Financial Project (PDF page 218)
The customer ' s configuration and construction standards were met. The construction period was fixed and were not changed. The use of the office network on the next day was not affected.
The same case study states that the cutover window started at 00:00 on Saturday night and lasted five hours.
Technical Deep Dive:
Major service-affecting operations must be performed within an approved maintenance window to minimize operational disruption, control implementation risks, and provide sufficient time for verification and service restoration.
Option D is the expected answer. It establishes customer approval as the primary requirement and specifies 00:00–06:00 as a recommended low-traffic maintenance window.
Operations such as service cutover, configuration modification, board replacement, software loading, and power-off reset can temporarily interrupt services or introduce configuration inconsistencies.
Therefore, a controlled implementation procedure should include an approved change request, impact assessment, maintenance plan, rollback procedure, communication plan, and post-operation verification.
Performing such activities during a period of lower business activity can reduce the consequences of an unexpected interruption. However, the actual maintenance window must account for customer requirements, network utilization, geographic service coverage, and product-specific restrictions.
Option A proposes a fixed time interval without establishing customer approval as the overriding requirement.
Option B uses ordinary business hours, during which service interruptions may have greater operational consequences.
Option C is incorrect because high-risk service operations must not be performed arbitrarily.
For critical infrastructure, the governing product documentation and customer-approved maintenance procedure take precedence over a general recommended window.
Verification qualification: D is also the published answer for this question in the H20-688 practice bank. The uploaded Huawei training PDF demonstrates a midnight cutover, but does not explicitly establish 00:00–06:00 as a universal prescribed interval. Consequently, the exact six-hour recommendation is not independently verified from this PDF.
After batteries have been fully discharged, recharge them promptly to prevent damage caused by overdischarge.
Options:
True
False
Answer:
AExplanation:
Exact Extract — Safety Operation Requirements 6/7: Battery Failure Prevention (PDF page 189, training slide 48)
After batteries are discharged, charge them in time to avoid damage due to overdischarge.
Technical Deep Dive:
Lithium-ion batteries must be maintained within the operating voltage and state-of-charge limits specified by the manufacturer.
Option A is correct because prolonged discharge can damage battery cells and reduce their operational reliability.
During normal discharge, the battery management system (BMS) monitors cell voltages, temperatures, current, and other operational parameters.
When a battery reaches its permitted minimum state of charge, the BMS should restrict or terminate further discharge to protect the cells.
However, batteries may continue losing charge through self-discharge and the consumption of auxiliary electronics.
If a discharged battery remains unused for an extended period, its cell voltage may fall below the manufacturer ' s permitted limits.
Excessive discharge can produce irreversible electrochemical deterioration, reduced capacity, increased internal resistance, and other safety or reliability problems.
Prompt charging according to approved product instructions helps maintain the battery within its permissible operating range.
Importantly, the requirement does not authorize charging visibly damaged batteries or bypassing BMS protections.
If a battery has reached an abnormal undervoltage condition, qualified personnel must follow the manufacturer ' s recovery or replacement procedure.
The applicable charging method, voltage, current, temperature limits, and timing depend on the specific Huawei battery product.
Final verification: A.
Personnel who have completed health and safety training, passed the relevant assessments, and obtained the work certificate required by government agencies are qualified to operate the corresponding devices.
Options:
True
False
Answer:
BExplanation:
Exact Extract — Safety Operation Requirement 1: Qualification (PDF page 11, training slide 10)
Installation and maintenance personnel of Digital Power products must pass the corresponding health and safety assessment and training, obtain the qualification certification as required by relevant government agencies, and pass the Huawei service certification exam before operating the equipment.
Technical Deep Dive:
Personnel qualifications are a fundamental requirement for safe installation, commissioning, and maintenance of Huawei Digital Power equipment.
Option B is correct under Huawei ' s complete equipment-operation qualification requirements.
The statement identifies health and safety training, relevant assessments, and government-required work certificates but omits Huawei ' s additional service certification requirement.
Huawei ' s qualification framework establishes several complementary requirements.
Health and safety competence: Personnel must understand workplace hazards, protective measures, emergency procedures, and safe operating practices.
Regulatory qualifications: Special operations such as electrical work, welding, refrigeration, and working at heights may require licenses or professional certificates issued or recognized by the appropriate authorities.
Huawei service certification: Installation and maintenance personnel must pass the relevant Huawei service certification examination before undertaking the corresponding equipment operations.
These requirements serve different purposes. Government certification demonstrates compliance with applicable occupational or technical regulations, while Huawei certification establishes competence in the relevant product-specific service procedures.
An electrician who holds the required legal work certificate does not automatically satisfy every requirement for commissioning or maintaining a particular Huawei Digital Power product.
The responsible project personnel must verify that qualifications remain valid and correspond to the activities being performed.
Question interpretation: If the statement were intended only to establish general legal eligibility for certain work, it would be incomplete rather than universally false. In the HCSP-Field-SQA context, however, it concerns qualification to operate Huawei equipment, for which the additional service certification is explicitly required.
Final verification: B.
According to the training materials, which of the following form part of the SAROP method?
Select All that Apply.
Options:
Do I have the skills and knowledge required to do this work?
Have I checked that my activities do not endanger or affect the safety of other personnel?
Do I hold the permit required for this work or have I obtained the approval?
Have I identified the risks of this work and taken measures to ensure my safety?
Have I used the right PPE?
Answer:
A, B, C, D, EExplanation:
Exact Extract — Summary: Safety Management Rules and SAROP (PDF page 160, training slide 19)
Skill: Do I have the skills and knowledge required to do this job?
Approve: Do I hold the permit required for this work or have I obtained the approval?
Risk: Have I identified the risks of this work and taken measures to ensure my safety?
Others: Have I checked that my activities do not endanger or affect the safety of other personnel?
PPE: Have I used the right PPE?
Technical Deep Dive:
SAROP is a structured pre-operation safety assessment method that encourages personnel to verify essential safety conditions before performing work.
The acronym consists of five elements.
S — Skill: Personnel must determine whether they possess the necessary technical knowledge, practical experience, and qualifications to perform the assigned activity safely.
A — Approve: Required work permits, authorizations, and approvals must be obtained before operations begin.
R — Risk: Workers must identify potential hazards and confirm that appropriate preventive measures are in place.
O — Others: Personnel must consider whether their activities could endanger coworkers, visitors, customers, or other individuals near the work area.
P — PPE: Workers must confirm that they have selected and are correctly using the protective equipment required for the activity.
These checks help prevent incidents arising from inadequate preparation, unauthorized operations, unrecognized hazards, and insufficient protective measures.
SAROP is particularly relevant to Huawei Digital Power activities involving electrical operations, battery maintenance, lifting equipment, and working at heights.
The method complements formal risk assessments, technical operating procedures, and permit-to-work requirements rather than replacing them.
Final verification: All five options are correct.
All lithium batteries are exempt dangerous goods.
Options:
True
False
Answer:
BExplanation:
Exact Extract — Definition and Classification of Dangerous Goods (PDF page 46, training slide 6)
Dangerous goods can be exempt (such as tablets and other products that contain lithium batteries with a capacity of less than 100 Wh) or non-exempt (such as energy storage devices). Exempt dangerous goods are considered as common goods.
Technical Deep Dive:
Lithium batteries are generally associated with Class 9 dangerous-goods classification, but their transportation requirements depend on battery type, energy rating, configuration, condition, and applicable regulations.
Option B is correct because not all lithium batteries qualify for dangerous-goods exemptions.
Certain smaller batteries may qualify for reduced transport requirements when they satisfy the applicable eligibility conditions.
However, larger lithium-ion batteries used in Huawei Digital Power energy-storage systems commonly remain subject to dangerous-goods transportation controls.
Applicable requirements may include UN classification, battery testing documentation, approved packaging, hazard labels, transport declarations, and carrier qualifications.
The distinction between exempt and non-exempt dangerous goods is important for warehouse management and logistics planning.
For example, a large lithium-ion energy-storage battery cannot automatically be transported under the same conditions as a small battery installed in a consumer electronic device.
Damaged or defective batteries may also require additional restrictions because their safety characteristics differ from those of properly manufactured and undamaged products.
The applicable classification must therefore be established using the relevant product information and transportation regulations.
Technical qualification: The training uses exempt as a simplified operational category. In formal transport regulations, exceptions may reduce certain requirements without eliminating every applicable dangerous-goods obligation.
Final verification: B.
Certified Service Partners (CSPs) are service partners that have passed Huawei’s service certification. CSPs are accountable for the satisfaction of end customers to whom services are provided.
Options:
True
False
Answer:
AExplanation:
Exact Extract — Process/Role Terms (PDF page 221, training slide 17)
Certified Service Partner (CSP). A CSP is a service partner who has passed Huawei ' s service certification. CSPs are responsible for the satisfaction of end customers to whom services are delivered.
Technical Deep Dive:
A Certified Service Partner is an organization that has fulfilled Huawei ' s applicable service certification requirements and is authorized to undertake defined service activities within its certification scope.
Option A is correct because both statements accurately reflect the CSP definition and associated customer satisfaction responsibility.
Service certification establishes that a partner meets specified service capability requirements. Depending on the certification, these may include professional qualifications, technical competencies, delivery procedures, management capabilities, and customer service requirements.
CSPs are responsible for delivering services in accordance with Huawei ' s standards and satisfying the expectations of the end customers receiving those services.
This responsibility includes maintaining service quality, complying with contractual commitments, controlling delivery risks, and responding appropriately to customer feedback.
The training also distinguishes CSPs from Authorized Service Partners (ASPs).
ASPs accept Huawei-outsourced service orders and deliver Huawei-branded services to end users. CSPs are characterized by their service certification and responsibility for the satisfaction of customers to whom their services are delivered.
For SQA personnel, evaluating partner performance includes monitoring qualifications, service process compliance, quality outcomes, customer feedback, and corrective actions.
Final verification: A.
Cybersecurity crises are simplified into seven subcategories within five categories, based on the parties concerned. External security research organizations/research publicly allege that Huawei products or cloud services have major security vulnerabilities that Huawei leaves unresolved internationally, or that Huawei itself directly leaves vulnerabilities that may be suspected as “backdoors.” Which crisis category is this?
Options:
Peers’ doubts
Governments’ doubts
Customers’ doubts
Regulators’ doubts
Answer:
AExplanation:
Exact Extract — Definition and Classification of Cyber Security Crisis (PDF page 80, training slide 9)
Classification of V2.0 cyber security crisis: Simplified cyber security crises into 7 sub-categories in 5 categories based on the concerned parties.
Peers ' doubts — Product security: External security research organizations/researchers publicly question that Huawei products/cloud services have major security vulnerabilities which Huawei intentionally leaves unfixed, or Huawei directly leaves vulnerabilities, which may be suspected as " backdoors. "
Technical Deep Dive:
Huawei ' s cybersecurity crisis classification framework distinguishes security-related allegations according to their origin, nature, and potential impact on customers, regulators, government agencies, and other stakeholders.
Option A is correct because the scenario concerns allegations raised publicly by external security researchers or research organizations.
The peers ' doubts category covers product-security accusations that Huawei products or cloud services contain serious vulnerabilities that remain unresolved, including allegations concerning intentionally retained vulnerabilities or suspected backdoor functionality.
These allegations require technical investigation, evidence-based analysis, coordinated communication, and appropriate escalation under the established cybersecurity crisis management process.
The distinction between suspected vulnerabilities and confirmed malicious functionality is important. A public allegation does not, by itself, establish that a backdoor exists.
The other categories describe different types of concerns.
Governments ' doubts involve negative security assessments, investigation reports, or public warnings issued by government authorities.
Customers ' doubts may involve concerns about product functionality, unauthorized operations, privacy violations, or security controls affecting customer systems.
Regulators ' doubts involve concerns about regulatory compliance or the fulfillment of cybersecurity obligations.
The appropriate response to a peer-related cybersecurity crisis includes evaluating the allegation, reproducing relevant technical findings, coordinating remediation where necessary, and documenting the investigation and resolution.
Final verification: A directly matches the crisis classification.
Which of the following is not included in process quality control?
Options:
Quality spot-check
Construction process management
Environment management
Entry management
Answer:
CExplanation:
Exact Extract — Standard Delivery Framework for Project Implementation (PDF page 251, training slide 6)
The framework identifies the following activities under in-process quality control (IPQC):
Entry management
Construction process management
Acceptance quality control
Quality spot-check
Technical Deep Dive:
Huawei ' s standard delivery framework separates project quality management into distinct activities covering preparation, construction, and completion.
Option C is correct because environment management is not listed as a separate activity within the framework ' s defined IPQC grouping.
Environmental verification primarily establishes whether storage and installation conditions meet equipment requirements before equipment delivery or installation.
These checks include temperature, humidity, ventilation, installation space, foundations, and protection against water ingress.
Although environmental conditions continue to influence construction quality, the framework classifies the corresponding environment preparation and verification activities separately from its principal IPQC list.
Option A — Quality spot-check: SQA personnel perform inspections to identify installation defects, document nonconformities, and supervise corrective actions.
Option B — Construction process management: This includes monitoring construction implementation, compliance with technical specifications, and operational quality controls.
Option D — Entry management: This includes verifying equipment and material acceptance, packaging integrity, quantities, specifications, and damage conditions during delivery.
All three appear within the process quality control framework.
The distinction is organizational rather than suggesting that environmental management is unimportant.
Final verification: C is the expected answer under Huawei ' s specified IPQC classification.
Improving the team’s service capability does not require verifying the consistency of service standards.
Options:
True
False
Answer:
BExplanation:
Exact Extract — Service Consistency Value Proposition (PDF page 217, training slide 13)
Enable service partners to build standard service processes, improve team service capabilities, and use efficient operation tools to provide customers with high-quality and well-regarded services, build customers ' consistent experience, and improve customer satisfaction.
Technical Deep Dive:
Service capability improvement and service standard consistency are closely connected elements of Huawei Digital Power ' s service management framework.
Option B is correct because improving technical skills alone does not guarantee consistent service delivery. Service partners must also implement standardized processes, verify compliance with applicable requirements, and monitor service quality.
Huawei ' s service consistency approach aims to ensure that customers receive predictable service quality regardless of the individual engineer, service partner, or project location.
Standardized service delivery includes defined operational procedures, technical specifications, inspection requirements, documentation templates, and acceptance criteria.
For example, two engineers installing the same Digital Power product should follow equivalent installation standards and produce the required quality verification records.
Without consistent standards, different engineers may apply different torque values, inspection practices, safety precautions, or commissioning procedures, resulting in inconsistent outcomes.
Service capability development therefore requires both personnel competency improvement and verification of operational standardization.
Digital service platforms, structured inspections, and standardized documentation help establish traceability and reduce variability.
For SQA personnel, monitoring service consistency includes evaluating qualifications, process compliance, installation quality, customer feedback, and corrective-action effectiveness.
Final verification: B. The statement contradicts Huawei ' s service consistency value proposition.
Do not perform work at height when scaffold steel pipes are wet or when other hazardous conditions exist.
Options:
True
False
Answer:
AExplanation:
Exact Extract — Safety Operation Requirements 4/7: Preventing Falling from Heights (PDF page 187, training slide 46)
Do not work at heights when scaffold steel pipes are wet or other risky situations exist.
Technical Deep Dive:
Working at heights presents significant fall hazards and requires strict control of environmental conditions, personnel qualifications, access equipment, and fall-protection systems.
Option A is correct because wet scaffold components can increase slipping risks and make climbing or movement less secure.
Moisture on scaffold pipes, platforms, ladders, and associated structures may reduce traction and increase the likelihood of losing balance.
Other hazardous conditions may include strong winds, thunderstorms, inadequate visibility, unstable scaffolding, damaged access equipment, or missing fall-protection systems.
Huawei requires personnel involved in working at heights to possess the appropriate qualifications and use the necessary protective measures.
These may include safety helmets, approved safety harnesses, suitable anchorage arrangements, and protective footwear.
Warning signs and barriers must be installed where necessary to prevent unauthorized entry beneath elevated working areas.
Personnel must also avoid throwing objects from heights or allowing individuals to stand beneath locations where tools or materials could fall.
Before work begins, the responsible supervisor should verify that weather conditions, access structures, protective equipment, and work procedures are suitable.
If hazardous conditions develop during the operation, the work must be suspended until appropriate controls have been restored.
Final verification: A.
The construction preparation phase includes preparing for entry, developing a quality plan, checking qualifications, and carrying out technical and safety disclosure.
Options:
True
False
Answer:
AExplanation:
Exact Extract — Adaptation to SQA Operation Standard Process (PDF page 252, training slide 7)
Obtain project information. Obtain project information and identify quality risks.
Develop quality plans. Analyze the key items of the project and develop the quality management plan.
Check qualifications. Check whether the certification of the delivery partner company and the special operation qualification certificates of the installation personnel are within the validity period.
Conduct technical and safety disclosure. Participate in technical and safety disclosure, and supervise the supervision engineer to complete technical and safety disclosure to construction personnel, project team leader, customer/EPC and other related personnel before construction entry.
Technical Deep Dive:
The construction preparation phase establishes the operational, technical, and quality assurance conditions necessary for controlled project execution.
Option A is correct because all four activities belong to the preparation stage in Huawei ' s SQA operation standard process.
Preparing for entry involves obtaining project information, understanding the delivery scope, identifying site conditions, and examining potential quality and safety risks.
Quality planning establishes project-specific objectives, critical control points, inspection requirements, and responsibilities. The SQA coordinates relevant business departments to identify risks and implement preventive measures.
Qualification verification ensures that service partners, installation engineers, and personnel conducting specialized operations possess the required valid certifications.
Technical and safety disclosure ensures that construction personnel and project stakeholders understand equipment installation requirements, operating procedures, safety precautions, and preventive measures before construction begins.
The supervision engineer is responsible for conducting the required disclosure, while the SQA supervises its completion and checks the corresponding documentation.
These activities reduce the probability of construction defects, unauthorized work, safety incidents, and subsequent project delays.
The preparation phase is therefore not limited to administrative arrangements. It establishes the controls required for quality assurance throughout subsequent construction activities.
Final verification: A.