Microsoft AZ-801 Dumps

You have two Azure virtual networks named Vnet1 and Vnet2.

You have a Windows 10 device named Client1 that connects to Vnet1 by using a Point-to-Site (P2S) IKEv2 VPN.

You implement virtual network peering between Vnet1 and Vnet2. Vnet1 allows gateway transit Vnet2 can use the remote gateway.

You discover that Client1 cannot communicate with Vnet2.

You need to ensure that Client1 can communicate with Vnet2.

Solution: You resize the gateway of Vnet1 to a larger SKU.

Does this meet the goal?

You have an Azure subscription.

Your on-premises network connects to Azure by using an Azure VPN gateway named VPN1.

You need to monitor the Azure gateway health probe for VPN1.

Which TCP port should you use?

You have 100 Azure virtual machines that run Windows Server. The virtual machines are onboarded to Microsoft Defender for Cloud.

You need to shut down a virtual machine automatically if Microsoft Defender for Cloud generates the " Antimalware disabled in the virtual machine " alert for the virtual machine.

What should you use in Microsoft Defender for Cloud?

Your on-premises network contains an Active Directory Domain Services (AD DS) domain. The domain contains the servers shown in the following table.

You have an Azure subscription.

You plan to migrate the data on FS1 to Azure by using Azure Data Box Gateway.

You need to configure a Data Box Gateway virtual device.

Which four actions should you perform in sequence? To answer, move the appropriate actions from the list of actions to the answer area and arrange them in the correct order.

Note: This question is part of a series of questions that present the same scenario. Each question in the series contains a unique solution that might meet the stated goals. Some question sets might have more than one correct solution, while others might not have a correct solution.

After you answer a question in this section, you will NOT be able to return to it. As a result, these questions will not appear in the review screen.

You have a failover cluster named Cluster! that hosts an application named Appl.

The General tab in App1 Properties is shown in the General exhibit (Click the General tab.)

The Failover tab in App1 Properties is shown in the Failover exhibit. (Click the Failover tab.)

Server2 shuts down unexpectedly.

You need to ensure that when you start Server2, App1 continues to run on Server2.

Solution: You pause the Server1 node in Cluster1 and then start Server1.

Does this meet the goal?

You have 100 Azure virtual machines that run Windows Server.

You plan to use Azure Monitor agents to track occurrences of event 10 1035 in the Application log of each virtual machine.

You need to ensure that the events will be available tor analysis in Log Analytics. The solution must minimize the total volume of events stored in Azure.

What should you do? To answer, select the appropriate options in the answer area.

NOTE: Each correct selection is worth one point.

You have an Azure virtual machine named VM1 that runs Windows Server. You need to perform the following tasks on VM1:

• Configure Windows Defender Firewall to allow Remote Desktop connections.

• Configure where to store the logs of the virtual machine console.

Which two settings should you use? To answer, select the settings in the answer area. NOTE: Each correct selection is worth one point.

You need to use a comma-separated value (CSV) file to import server inventory to Azure Migrate. Which fields are mandatory for each entry in the CSV file?

Your network contains an Active Directory Domain Services (AD DS) domain All domain members have Microsoft Defender Credential Guard with UEFI tock configured in the domain you deploy a server named Server1 that runs Windows Server. You disable Credential Guard on Server1. You need to ensure that Server1 is MOST subject to Credential Guard restrictions. What should you do next?

Your network contains an Active Directory Domain Services (AD DS) domain. The domain contains two servers named Server1 and Server2 that run Windows Server.

On Server1, you create an event subscription named Subscription! that retrieves events from Server2. The Query Filter settings (or Subscription! are configured as shown in the following exhibit.

For each of the following statements, select Yes if the statement is true. Otherwise, select No.

NOTE: Each correct selection is worth one point.

You have a server named Server1 that runs Windows Server.

You need to ensure that only specific applications can modify the data in protected folders on Server1.

Solution: From App & browser control, you configure the Reputation-based protection.

Does this meet the goal?

You have three servers named Server1, Server2, Server3 that run Windows Server and have the Hyper-V server role installed.

You plan to create a hyper-converged cluster to host Hyper-V virtual machines.

You need to ensure that you can store virtual machines in Storage Spaces Direct.

Which three actions should you perform in sequence? To answer, move the appropriate actions from the list of actions to the answer area and arrange them in the correct order.

You have an on-premises server named Server1 that runs Windows Server. Server1 contains multiple file shares and has an IP address of 192.168.10.12.

You have an Azure subscription.

You need to migrate the Server1 file shares to an Azure virtual machine by using Storage Migration Service. The solution must ensure that on-premises users can access the migrated file shares by using the 192.168.10.12 IP address.

What should you include in the solution?

You have an Azure subscription.

You plan to deploy a virtual machine named VM1 to the East US Azure region and use Azure Site Recovery between availability zones.

You need to configure the disks on VM1 and the virtual network. The solution must meet the following requirements:

• Maximize the availability of VM1.

• Maintain the private IP address of VM1 during failover and failback operations.

What should you configure? To answer, select the appropriate options in the answer area. NOTE: Each correct selection is worth one point .

Your network contains an Active Directory Domain Services (AD DS) domain named contoso.com. The domain contains domain controllers that run Windows Server 2016.

Vou build a new AD DS forest named nwtraders.com. The forest contains domain controllers that run Windows Server 2025.

You plan to perform a phased migration from contoso.com to nwtraders.com.

You perform the following actions:

• Migrate the users in contoso.com to nwtraders.com and enable slDHistory.

• Establish a two-way forest trust between contoso.com and nwtraders.com.

• Install the Active Directory Migration Tool (ADMT) in nwtraders.com.

You have an on-premises IIS web server that hosts several .NET applications.

You plan to migrate the applications to Azure App Service. The applications will NOT be containerized. What should you use to perform the migration?

You have 200 Azure virtual machines.

You create a recovery plan in Azure Site Recovery to fail over all the virtual machines to an Azure region. The plan has three manual actions.

You need to replace one of the manual actions with an automated process.

What should you use?

You have a failover cluster named Cluster! that contains two Windows Server nodes named Server1 and Server2. Cluster! hosts highly available Hyper-V virtual machines.

You have a member server named Server3 that runs Windows Server.

You need to implement Cluster-Aware Updating (CUA) on Cluster! and configure Server3 to manage CUA. The solution must minimize administrative effort.

What should you install on Server3?

Your company uses Storage Spaces Direct.

You need to view the available storage in a Storage Space Direct storage pool.

What should you use?

Your network contains an Active Directory Domain Services (AD DS) domain that has a Windows Server 2012 R2 forest and domain functional level. The domain contains the domain controllers shown in the following table.

You need to ensure that you can deploy a new domain controller that runs Windows Server 2025. The solution must minimize administrative effort.

Which two actions should you perform? Each correct answer presents part of the solution.

NOTE: Each correct selection is worth one point.

You deploy Azure Migrate to an on-premises network.

You have an on-premises physical server named Server1 that runs Windows Server and has the following configuration.

Operating system disk 600 GB

Data disic 3 TB

NIC Teaming: Enabled

Mobility service: installed

Windows Firewall: Enabled

Microsoft Defender Antivirus: Enabled

You need to ensure that you can use Azure Migrate to migrate Server1.

Solution: You disable Microsoft Defender Antivirus on Server1.

Does this meet the goal?

You have a failover cluster named Cluster1 that hosts an application named App1.

The General tab in App1 Properties is shown in the General exhibit (Click the General Tat)

The failover tab in App1 Properties is shown in the failover exhibit (Click the Failover tab.)

Server 1 shuts down unexpectedly.

You need to ensure that when you start Server 1. App1 continues to run on Server2

Solution: From the General settings, you increase the priority of Server2 in the Preferred Owners list.

Does this meet the goal?

You have a server that runs Windows Server. The server is configured to encrypt all incoming traffic by using a connection security rule.

You need to ensure that Server1 can respond to the unencrypted tracert commands initiated from computers on the same network.

What should you do from Windows Defender Firewall with Advanced Security?

You have two onpremises Hyper-V hosts named Served and Server2, Server1 contains two virtual machines named VM1 and VM2. Server2 contains three virtual machines named VM21. VM22, and VM23.

You have an Azure subscription.

You plan to use Azure Site Recovery to replicate all the virtual machines to Azure.

You need to deploy the Microsoft Azure Site Recovery Provider to the on-premises infrastructure.

What is the minimum number of providers you should install?

You have an on-premises server named Server1 that runs Windows Server.

You have an Azure subscription that uses Microsoft Defender for Cloud.

You need to onboard Server1 to Defender for Cloud.

Which actions should you perform in sequence? To answer, drag the appropriate actions to the correct order. Each action may be used once, more than once, or not at all. You may need to drag the split bar between panes or scroll to view content.

NOTE: Each correct selection is worth one point.

Note: This question is part of a series of questions that present the same scenario. Each question in the series contains a unique solution that might meet the stated goals. Some question sets might have more than one correct solution, while others might not have a correct solution.

After you answer a question in this section, you will NOT be able to return to it. As a result, these questions will not appear in the review screen.

You have an on-premises server named Server1 that runs Windows Server.

You have a Microsoft Sentinel instance.

You add the Windows Firewall data connector in Microsoft Sentinel.

You need to ensure that Microsoft Sentinel can collect Windows Firewall logs from Server1.

Solution: You install the Microsoft Integration Runtime on Server1.

Does this meet the goal?

You have an on-premises server named Server1 that runs Windows Server. You need to perform an on-demand backup of the files on Server 1 by using Azure Backup.

Which five actions should you perform in sequence? To answer, move the appropriate actions actions from the list of actions to the answer are and arrange them in the correct order.

You need to meet the technical requirements for User1.

To which group in contoso.com should you add User1?

You are evaluating the technical requirements tor Cluster2.

What is the minimum number of Azure Site Recovery Providers that you should install?

You need to meet the technical requirements for Cluster2.

Which four actions should you perform in sequence before you can enable replication? To answer, move the appropriate actions from the list of actions to the answer area and arrange them in the correct order.

You need to meet technical requirements for Share1.

What should you use?

You need to configure BitLocker on Server4.

On which volumes can you turn on BitLocker, and on which volumes can you turn on auto-unlock? To answer, select the appropriate options in the answer area.

NOTE: Each correct selection is worth one point.

With which servers can Server1 and Server3 communicate? To answer, select the appropriate options in the answer area.

NOTE: Each correct selection is worth one point.

You need to implement alerts for the domain controllers. The solution must meet the technical requirements.

What should you do on the domain controllers, and what should you create on Azure? To answer, select the appropriate options in the answer area.

NOTE: Each correct selection is worth one point.

Which domain controller should be online to meet the technical requirements for DC4?

You need to back up Server 4 to meet the technical requirements.

What should you do first?

What is the effective minimum password length for User1 and Admin1? To answer, select the appropriate options in the answer area.

NOTE: Each correct selection is worth one point.

For each of the following statements, select Yes if the statement is true. Otherwise, select No.

NOTE: Each correct selection is worth one point.

You need to meet the technical requirements for Cluster3.

What should you include in the solution?

You are planning the implementation of Cluster2 to support the on-premises migration plan.

You need to ensure that the disks on Cluster2 meet the security requirements.

In which order should you perform the actions? To answer, move all actions from the list of actions to the answer area and arrange them in the correct order.

You are remediating the firewall security risks to meet the security requirements.

What should you configure to reduce the risks?

You are planning the migration of APP3 and APP4 to support the Azure migration plan.

What should you do on Cluster1 and in Azure before you perform the migration? To answer, select the appropriate options in the answer area.

NOTE: Each correct selection is worth one point.

You are planning the DHCP1 migration to support the DHCP migration plan.

Which two PowerShell cmdlets should you run on DHCP1, and which two PowerShell cmdlets should you run on DHCP2? To answer, drag the appropriate cmdlets to the correct servers. Each cmdlet may be used once, more than once, or not at all. You may need to drag the split bar between panes or scroll to view content.

NOTE: Each correct selection is worth one point.

You are planning the migration of Archive1 to support the on-premises migration plan.

What is the minimum number of IP addresses required for the node and cluster roles on Cluster3?

You are planning the europe.fabrikam.com migration to support the on-premises migration plan-Where should you install the Password Export Server (PES) service, where should you generate the encryption key? To answer, select the appropriate options in the answer area.

NOTE: Each correct selection is worth one point.

You are planning the deployment of Microsoft Sentinel.

Which type of Microsoft Sentinel data connector should you use to meet the security requirements?

You are planning the website migration to support the Azure migration plan.

How should you configure WebApp1? To answer, select the appropriate options in the answer area.

NOTE: Each correct selection is worth one point.

You need to implement a security policy solution to authorize the applications. The solution must meet the security requirements.

Which service should you use to enforce the security policy, and what should you use to manage the policy settings? To answer, select the appropriate options in the answer area.

NOTE: Each correct selection is worth one point.

You are planning the data share migration to support the on-premises migration plan.

What should you use to perform the migration?